Sewing with a double needle on a sewing machine. Correctly threading a sewing machine. Sewing with a double needle and metallic thread

USING DOUBLE NEEDLES FOR A SEWING MACHINE

Any sewing machine sews with a double needle - this is not a function of the machine itself, but of the needle that you insert. You need to thread 2 spools of thread on top, then insert the threads into 2 eyes of the needle and sew. Since there is 1 bobbin at the bottom, the bottom line looks zigzag, and the top line looks like 2 parallel lines. It turns out beautifully when the tension of the upper threads is slightly tightened, then the seam on the knitwear turns out to be convex.
When you get the hang of it, try tucking the threads of two different colors and make a decorative stitch with a double needle, it’s very beautiful! Just be careful at the beginning, some machines make such a mistake that the width of the decorative stitch goes the entire width of the foot and the second tail of the needle risks hitting the foot.

But! I would like to note that any machine can use double needles if the thread is inserted into the needle from the front. And now, I suggest you familiarize yourself with useful information on this topic, taken from various sources

The twin needle can be installed in any sewing machine that has a zigzag stitch. The main thing to pay attention to before you buy double needle This is the width of the throat plate hole. The distance between the needles should not be wider than this hole. How to sew and how to use a double needle? Just like you use one needle, only with two top threads, passing both threads through one tensioner.
Twin needle sewing increases the capabilities of your machine and makes decorative and finishing stitches easier. Using a double needle for knitwear makes it possible to imitate the stitching of a flat-stitch machine. A sewing double needle is indispensable when sewing clothes with double stitching. Finishing stitches on jeans, patch pockets, details men's shirts etc. You can stitch evenly and neatly by sewing a seam with a double needle.

How to use a double needle
How to use a double needle? Just like with a regular needle, you just need to buy a suitable double needle for your model sewing machine and fill both top threads simultaneously into two needles. The bottom thread in the bobbin will be used by both top threads at the same time.

Twin needles are not suitable for all machines.

Double needles can sew different fabrics, but only in machines with a zigzag stitch; straight-stitch machines like Podolskaya are not intended for their use. The needle plate of these machines has one round hole, while the double needle requires a narrow and wide slot, which is used in zigzag stitch machines. In addition, additional thread guides and a stand for the second spool are required. If you are going to install a twin needle on your Chaika sewing machine, pay attention to how the needle is positioned in the hole when it is sewing a straight stitch. The needle should pass exactly in the center of the needle hole. If there is misalignment when using a double needle, it may break.

An additional creel is required for the second spool of thread.
Modern sewing Janome machines, Brother, Juki and many others have a creel for two spools of thread and paired thread feeders and thread guides, into which the upper threads are threaded separately.

Double needle installation
A double needle is accepted at any time sewing machine, just like a regular needle. The flat of the needle (cut) should be directed back, away from you, and the round side should be directed towards you, forward. Each coil must have a separate pin (coil holder), sometimes an additional one is installed for this. If there is only one spool stand on the machine body, then a second one is included in the kit. The threads from the spools are passed through all the thread guides, including the upper thread tensioner, together, and only the lowest thread guides separate them into needles. The left thread is threaded into the left needle, the right thread into the right needle. If there is only one thread guide, like Chaika’s, then the left thread is passed through the thread guide, and the right one next to it, directly into the eye of the right needle.

What are they and their purpose

A double needle can have different distances between the needles - narrower, wider, and there are even triple needles. Different widths make it possible to choose the width of the finishing stitch and use it for design. The use of double needles is more intended for decorative seams that do not experience heavy loads.
Of course, it can be used to make finishing stitches on a pocket or flap shirt. But, we should not forget that to form a seam, a double needle uses only one thread - the bottom one, so such a seam will not be particularly strong. But, for example, for embroidering two or three parallel patterns at the same time, a double needle is simply irreplaceable. This pattern looks especially impressive if the threads different colors. Using double needles with a narrow gap between them, you can create an imitation of shadow in the design. Using narrow needles, I place threads on top of each other, creating a shadow effect. In addition to simple finishing stitches, double needles can be used for sewing on braid, performing elastic gathering, tucks and other operations.

Attention! Incorrectly selected double needles may break
double needle

When buying double needles in a store for your sewing machine, pay attention to the maximum width of the needle plate opening on your machine, or simply the width of the zigzag stitch on your machine. Incorrectly selected needles may break, hitting the needle plate.
In addition, before you start sewing with a double needle, watch the stitch type switch. The stitch should not be set to a zigzag or other needle offset, such as zipper stitching, etc. The double needle should only work in straight stitch mode. In any other mode, they will simply break on the needle plate of the sewing machine.

Use of double needles

Have you used twin needles on your sewing machine yet? Now you will find out how many decorative and other possibilities its use in creating clothes provides.

To use double needles you need:

Front threading

The presence of a zigzag stitch in a sewing machine.

The distance between the needles should not exceed the maximum zigzag width of your machine!

Preparatory operations.

Double needle

Install a double needle on your machine, just like a regular single needle.

If your machine has two spool holders, install the spools so that one spool thread unwinds clockwise and the other counterclockwise. This will prevent the threads from getting tangled when sewing.

If you don't have two thread guides, insert one thread into the thread guide and leave the other loose.

Thread the threads into the corresponding needles. The machine is ready to sew. I advise you to sew at minimum speed, this will also help prevent threads from tangling.

Decorative stitches (embroidery)
Does your machine have decorative stitches? Try using twin needles to embellish clothing with these stitches.

Decorative stitches

The double needle allows you to embroider two parallel designs at the same time. You can thread the upper threads in different colors.

If you use narrow needles 1.8 - 2.5 mm, the stitch patterns will overlap each other, creating a shadow effect.

For decorative stitches, use a needle size smaller than the maximum zigzag width on your machine!

Sewing on braid

Sew on the braid

Place a needle slightly smaller than the width of the braid into the needle holder and attach the satin stitch foot to the machine. This foot has a wide groove on the sole.

Set the machine controls to straight stitch and desired stitch length. Loosen the upper thread tension. Thread the ribbon through the needle hole of the foot (or under the foot).

Place the fabric under the foot, lower the needles into the fabric and sew. The braid is attached to the fabric on both sides at the same time.

Ruffles with elastic

Sewing on elastic

Wind a thin bobbin sewing elastic(like Hungarian). The upper threads must match the fabric and match the color.

Set the stitch length to 2-2.5 mm and sew with a straight stitch.

An elastic band tucked into the shuttle mechanism will create uniform gathers on thin fabric. Admire how the use of a similar technique decorated the blouse.

Raised tucks

Relief tucks on fabric
For the following decorations you will need special foot for raised tucks. The foot has grooves on the sole into which the fabric is pulled during sewing, resulting in a raised fold.

Different pleat sizes require different presser feet. The wider and deeper the grooves, the more voluminous the relief can be obtained. Many parallel grooves on the foot allow you to lay reliefs that are even relative to each other.

The foot with 7 grooves is designed for small pintucks and is used on light fabrics.

A foot with 5 deep grooves is used for sewing on medium fabrics and allows you to make larger pintucks. This foot can also be used for sewing in cord.

Raised tucks

To make reliefs on light fabrics, it is recommended to use needles with a width of 1.6 - 2 mm; on medium tissues, needles 2.5 - 3 mm; and needles 4 mm or more on medium and heavy fabrics.

When stitching pintucks, the upper thread tension regulator should be set to 7-9, that is, to the maximum.

When decorating fabric with reliefs, keep in mind that the consumption will be higher.

Raised tucks

It is very important to perform the first tuck exactly, since the evenness of subsequent ones will depend on this. Therefore, draw the first line on the fabric and only then place a tuck along it.

It is advisable to first make reliefs on the larger part, then place the pattern on top of the part and mark the cut lines.

Embossed tucksRelief tucks

For wide stitching of reliefs, use a quilting guide.

Reliefs can be both decorative and serve as darts.

See how you can decorate a summer blouse with raised tucks. Use embossed tucks to decorate underwear, children's clothing, blouses, and summer tops.

Reliefs on fleece
raised tucks

How much time do you spend knitting a sweater? Try knitting a sweater in one day using a double needle. Believe me, it's very simple and fast!

For such reliefs as in the photo, you will need fleece and a double needle of at least 5 mm. Such reliefs will look beautiful on velvet.

Reliefs with cord
reliefs with cord

To sew in the cord, use a double needle of such a width (the distance between the needles) that the cord passes freely between the needles.

Install any foot suitable for sewing in cord: a foot for sewing on beads or a foot for large embossed tucks.

Reliefs with cord

Using a chalk or disappearing marker, draw a straight or curly line on the fabric where you want to add cord trim.

Pin the end of the cord to the beginning of the line on the wrong side of the fabric.

Place the fabric with the cord under the foot, make sure that the cord fits exactly between the needles and start sewing with a straight stitch following the line drawn on the fabric.

This is what the “reliefs with cord” trim on a blouse looks like. And these figured reliefs are made on transparent fabric with a backing of cords in a contrasting color.

Sewing knitwear
knitwear

To sew knitwear, use special needles for sewing knitwear with a width of 4-5 mm.

In the photo, the hem was made with a 4 mm needle. On the front side you can see a double straight stitch, on the back side there is a zigzag stitch, which allows the knitted fabric to stretch. This stitch imitates sewing on an overlocker.

Knitwear

Set your machine to the straight stitch and desired stitch length.

Fold the edge of the knitted product, lay it along front side stitch at the same distance from the fold.

Carefully trim the allowance close to the zigzag.

Sample stitches using a double needle were made on a Janome sewing machine model My Excel 23X. This machine has a maximum zigzag width of 6.5 mm.

Sample stitches using a double needle were made on a Janome sewing machine model My Excel 23X. This machine has a maximum width

Any sewing machine sews with a double needle - this is not a function of the machine itself, but of the needle that you insert. You need to thread 2 spools of thread on top, then insert the threads into 2 eyes of the needle and sew. Since there is 1 bobbin at the bottom, the bottom line looks zigzag, and the top line looks like 2 parallel lines. It turns out beautifully when the tension of the upper threads is slightly tightened, then the seam on the knitwear turns out to be convex.
When you get the hang of it, try threading two different colors of thread up and using a double needle to make a decorative stitch, it’s very beautiful! Just be careful at the beginning, some machines make such a mistake that the width of the decorative stitch goes the entire width of the foot and the second tail of the needle risks hitting the foot.

The twin needle can be installed in any sewing machine that has a zigzag stitch. The main thing to pay attention to before buying a twin needle is the width of the needle plate hole. The distance between the needles should not be wider than this hole. How to sew and how to use a double needle? Just like you use one needle, only with two top threads, passing both threads through one tensioner.
Twin needle sewing increases the capabilities of your machine and makes decorative and finishing stitches easier. Using a double needle for knitwear makes it possible to imitate the stitching of a flat-stitch machine. A sewing double needle is indispensable when sewing clothes with double stitching. Finishing stitches on jeans, patch pockets, details on men's shirts, etc. You can stitch evenly and neatly by sewing a seam with a double needle.

How to use a double needle

How to use a double needle? Just like with a regular needle, you just need to buy a suitable double needle for your sewing machine model and thread both upper threads simultaneously into two needles. The bottom thread in the bobbin will be used by both top threads at the same time.

Twin needles are not suitable for all machines.

An additional creel is required for the second spool of thread.

Modern sewing machines from Janome, Brother, Juki and many others have a creel for two spools of thread and paired thread feeders and thread guides, into which the upper threads are threaded separately.

Double needle installation

A double needle fits into any sewing machine, just like a regular needle. The flat of the needle (cut) should be directed back, away from you, and the round side should be directed towards you, forward. Each coil must have a separate pin (coil holder), sometimes an additional one is installed for this. If there is only one spool stand on the machine body, then a second one is included in the kit. The threads from the spools are passed through all the thread guides, including the upper thread tensioner, together, and only the lowest thread guides separate them into needles. The left thread is threaded into the left needle, the right thread into the right needle. If there is only one thread guide, like Chaika’s, then the left thread is passed through the thread guide, and the right one next to it, directly into the eye of the right needle.

What are they and their purpose

A double needle can have different distances between the needles - narrower, wider, and there are even triple needles. Different widths make it possible to choose the width of the finishing stitch and use it for design. The use of double needles is more intended for decorative seams that do not experience heavy loads.
Of course, it can be used to make finishing stitches on a pocket or flap shirt. But, we should not forget that to form a seam, a double needle uses only one thread - the bottom one, so such a seam will not be particularly strong. But, for example, for embroidering two or three parallel patterns at the same time, a double needle is simply irreplaceable. This pattern looks especially impressive if the threads are of different colors. Using double needles with a narrow gap between them, you can create an imitation of shadow in the design. Using narrow needles, I place threads on top of each other, creating a shadow effect. In addition to simple finishing stitches, double needles can be used for sewing on braid, performing elastic gathering, tucks and other operations.

Attention! Incorrectly selected double needles may break

Use of double needles

Have you used twin needles on your sewing machine yet? Now you will find out how many decorative and other possibilities its use in creating clothes provides.

To use double needles you need:

front threading

the presence of a zigzag stitch in a sewing machine.

the distance between the needles should not exceed the maximum zigzag width of your machine!

Preparatory operations.

Install a double needle on your machine, just like a regular single needle.

If your machine has two spool holders, install the spools so that one spool thread unwinds clockwise and the other counterclockwise. This will prevent the threads from getting tangled when sewing.

If you don't have two thread guides, insert one thread into the thread guide and leave the other loose.

Thread the threads into the corresponding needles. The machine is ready to sew. I advise you to sew at minimum speed, this will also help prevent threads from tangling.

Decorative stitches (embroidery)
Does your machine have decorative stitches? Try using twin needles to embellish clothing with these stitches.

The double needle allows you to embroider two parallel designs at the same time. You can thread the upper threads in different colors.

If you use narrow needles 1.8 - 2.5 mm, the stitch patterns will overlap each other, creating a shadow effect.

For decorative stitches, use a needle size smaller than the maximum zigzag width on your machine!

Sew on the braid

Place a needle slightly smaller than the width of the braid into the needle holder and attach the satin stitch foot to the machine. This foot has a wide groove on the sole.

Set the machine controls to straight stitch and desired stitch length. Loosen the upper thread tension. Thread the ribbon through the needle hole of the foot (or under the foot).

Place the fabric under the foot, lower the needles into the fabric and sew. The braid is attached to the fabric on both sides at the same time.

Ruffles with elastic

Wind a thin sewing elastic band (like Hungarian) onto the bobbin. The upper threads must match the fabric and match the color.

Set the stitch length to 2-2.5 mm and sew with a straight stitch.

An elastic band tucked into the shuttle mechanism will create uniform gathers on thin fabric. Admire how the use of a similar technique decorated the blouse.

Relief tucks on fabric
For the following embellishments you will need a special foot for raised tucks. The foot has grooves on the sole into which the fabric is pulled during sewing, resulting in a raised fold.

The foot with 7 grooves is designed for small pintucks and is used on light fabrics.

A foot with 5 deep grooves is used for sewing on medium fabrics and allows you to make larger pintucks. This foot can also be used for sewing in cord.

To make reliefs on light fabrics, it is recommended to use needles with a width of 1.6 - 2 mm; on medium tissues, needles 2.5 - 3 mm; and needles 4 mm or more on medium and heavy fabrics.

When stitching pintucks, the upper thread tension regulator should be set to 7-9, that is, to the maximum.

When decorating fabric with reliefs, keep in mind that the consumption will be higher.

It is very important to perform the first tuck exactly, since the evenness of subsequent ones will depend on this. Therefore, draw the first line on the fabric and only then place a tuck along it.

It is advisable to first make reliefs on the larger part, then place the pattern on top of the part and mark the cut lines.

For wide stitching of reliefs, use a quilting guide.

Reliefs can be both decorative and serve as darts.

See how you can decorate a summer blouse with raised tucks. Use embossed tucks to decorate underwear, children's clothing, blouses, and summer tops.

Reliefs on fleece

How much time do you spend knitting a sweater? Try knitting a sweater in one day using a double needle. Believe me, it's very simple and fast!

For such reliefs as in the photo, you will need fleece and a double needle of at least 5 mm. Such reliefs will look beautiful on velvet.

Reliefs with cord

To sew in the cord, use a double needle of such a width (the distance between the needles) that the cord passes freely between the needles.

Install any foot suitable for sewing in cord: a foot for sewing on beads or a foot for large embossed tucks.

Using a chalk or disappearing marker, draw a straight or curly line on the fabric where you want to add cord trim.

Pin the end of the cord to the beginning of the line on the wrong side of the fabric.

Place the fabric with the cord under the foot, make sure that the cord fits exactly between the needles and start sewing with a straight stitch following the line drawn on the fabric.

This is what the “reliefs with cord” trim on a blouse looks like. And these figured reliefs are made on transparent fabric with a backing of cords in a contrasting color.

Sewing knitwear

To sew knitwear, use special needles for sewing knitwear with a width of 4-5 mm.

Set your machine to the straight stitch and desired stitch length.

Fold the edge of the knitted product, lay a stitch along the front side at the same distance from the fold.

Carefully trim the allowance close to the zigzag.

Sample stitches using a double needle were made on a Janome sewing machine model My Excel 23X. This machine has a maximum zigzag width of 6.5 mm.

For many beginning needlewomen, sewing with a double needle causes real stupor, because what is obtained at first is far from ideal. Today I will show you how to set up your assistant so that the seam is beautiful, elastic and not tight.

First, let's refuel the machine. We will place the second spool on an additional rod and pull the threads from both spools as one through all the necessary slots. Next we will separate the threads. We will thread one into the needle, passing it through the thread guide, and the second, bypassing it. Set the stitch length to 3.5 mm.

Let's try stitching with standard settings. We get a beautiful stitch from the face, and from the inside we get strongly elongated loops of the upper thread and a lower thread pulled almost into a straight line.

Logic dictates that the upper thread tension should be increased. Let's try. We increase it by one division and try to flash it. We get the same thing, maybe even worse.

This is the same mistake that many make. The loops on the wrong side are not because the top thread is loose, but because the bottom thread is too tight!

Let's fix it! Unscrew the needle plate, remove it and take out the bobbin holder. (It can be easily reached by hand; I needed tweezers so that my fingers wouldn’t block anything in the photo.) By the way, once you’ve opened the inside of the car, clean it thoroughly; fuzz and dust have probably accumulated there. ;)

We reached the bobbin case and saw that there were two screws on it. We don't need the right one, with a cross notch. It secures the tension plate and should never be touched! But the left screw with a flat slot is precisely designed to adjust the tension. To work we need a small screwdriver.

Note for yourself the initial position of the screw in the direction of the slot (i.e. the place on the body where the notch on the screw is directed, I have a red dot there). At first, I simply scratched a notch on the body to return the screw to its previous position with millimeter accuracy. Noted? Now use a screwdriver to turn the screw counterclockwise a third of a turn (I have this position marked with a green dot). Usually this is enough. We put the bobbin holder in place and tighten the needle plate.

Let's try to flash it. Sample line No. 3. Much better already! The loops from the top threads became smaller, and the bottom thread began to fit in an obvious zigzag. In principle, you can already sew like this. But I want more.))))

You can try tightening the upper thread again. And then we get the line on sample No. 4. Better? Not at all!

Then I take out the bobbin holder again and loosen the lower thread a little more. I receive sample No. 5. Hooray! Just what you need!

We draw conclusions: when sewing with a double needle, the main adjustment is made not by the upper thread tension wheel, but by the screw on the bobbin holder. No matter how many times we tried to adjust the upper thread, it did not give any result other than pulling the stitches together into a roller. It may seem that this setup is complicated and time-consuming. At first, yes, but then habit and experience will turn it into a matter of seconds. And, you see, the beautiful line is worth it!
By the way, look, from the face all five samples look quite presentable.))))
Well, now you also know how to make beautiful stitching with a double needle. Like this, for example:
Good luck to everyone, obedient fabrics and precise settings! See you again soon - I'll bring it sports suit for my first grader.))))

Hello, dear readers blog "site". Today we'll talk about the delights sewing on a machine with a double needle.

How do you know if you can install a double needle on your machine? If your machine can sew with zig-zag, then you can safely use a double needle. But before you purchase a double needle, you need to measure the size of the gap on the needle plate in order to know what the maximum distance can be between two needles.

How does the sewing process itself happen? Instead of one upper thread, two threads will pass through the tensioner; to do this, you need to install a holder for the second spool (must come with the machine) and thread the second upper thread in the same way as the first.

Using a double needle, you significantly increase your sewing capabilities and make it easier for you to process products with double finishing stitches. After all, the double needle is most often used for finishing pockets, on jeans, on shirts, and at the same time, for two perfectly even lines, it is enough to make just one pass with a double needle. Saving time and effort is obvious).

How to sew with a double needle?

In order to sew comfortably with a double needle, you must not only thread the top two threads well, but also be sure to reduce the tension of the bottom thread in the bobbin, since the bottom thread will be wrong side fabric stretch between both top ones. It is also necessary to loosen the tension of the upper threads a little in order to avoid tearing the upper threads from the tension.

If possible, use a thread that you will thread into the bobbin that is one number thinner than the top ones. This way you will create ideal conditions on a machine in order to get a high-quality stitch.

When installing the needle, make sure that the machine is in straight stitch mode so as not to accidentally break the double needle.

Double needles for Janome machine

Japanese sewing machines Janome, Juki and Brother and others modern models Includes two spool pins and paired thread guides. An additional pin for the coil is installed in a special hole on the body of the machine.

How to thread a double needle?

We have already looked at how replace the needle And thread the sewing machine, but now we need to figure out how to install double needle.

The cut of the needle should be installed towards the back of the machine, and the round part of the needle flask should be directed towards itself. We pass the threads from both spools through the tensioner and through all the thread guides; the threads are separated only at the base of the upper part of the needle. Thread the right thread into the right needle, and the left thread into the left needle.

If you are installing a double needle on a Chaika machine, then pass the left thread through the lower thread guide, and simply pass the right thread next to it, since this model has one lower thread guide.

How to use a double needle?

Surely you already know that double needles differ in the distance between the needles, and the final appearance of the resulting stitch depends on this. Stitches made with double needles of different widths look completely different. This makes it possible to make various finishing stitches on clothes.

Most often, double needle stitching is used when hemming the bottom edge of items made from stretch fabrics, in decorative work, in finishing stitches on pockets and flaps, and in processing seams on jeans.

Twin needles can be of three types:

Denim
Stretch needles
Metallized

When choosing a needle, proceed from the specific task assigned to you, but it is better, of course, to have several types of needles, so as not to limit yourself and choose the best option.

Also, a double needle is in great demand in embroidery work, since a double needle is indispensable for creating parallel lines. And if you also “play” with the color of the threads and the width between the needles, you can get unexpected options with the effects of shadows from the threads, etc.

Watch also the video about the sizes, types and capabilities of double needles:

Craftswomen who begin to sew with a double needle see excellent results - the quality of sewing improves, productivity increases and there are more opportunities for developing a unique design. Thanks to its design, the double needle is suitable for most fabrics used, it is simple and convenient in daily use. But most importantly, it is suitable for almost all Janome sewing machines that have the “ zigzag ».

In this article we will talk about how to sew correctly using a double needle, what to look for when choosing this work accessory, how to set up machines and what safety rules to follow when performing assigned tasks.

What does a novice seamstress need to know?

The first thing you need to figure out is how the double needle works. Its design differs from conventional needles and includes a small thickened flask. It has a special flat insert for turning back, which is located in the rear. If you look at the body, you can see that two needles are attached to each other. In addition, the design includes an elongated groove, a rod, an additional short groove, an eyelet for threading and a sharp part that pierces the fabric in the necessary places during operation of the sewing machine. At first glance, the device seems complicated, but as you work, you can quickly figure out how to use a double needle correctly.

Exists several varieties of such needles on machines, distinguished by their purpose:

suitable for different fabrics - they are called universal;
For working with dense matter, for example, jeans;
which are used when sewing knitwear(super-stretch), and the design of such double needles is distinguished by a more rounded tip, which gently pushes the threads apart without piercing the fabric.

When deciding to purchase a double needle, it is important to pay attention to such parameters as the distance between the needles and the dimensions of the hole for threading. Threading them is practically no different from using one needle design, however, it will be necessary to use two spools, taking into account the passage of threads through the upper tensioner.

The advantages of using a double needle are obvious - you can speed up the work of finishing products with double stitches, repeat the properties of a flat-seam stitch without using a special sewing machine, and make a neat double seam on pockets, denim and other products. At the same time, the time to achieve the goal is significantly reduced.

Installation and start of the sewing process

It’s worth noting right away that a double needle is not suitable for every sewing machine. The design of the device must provide the ability to perform a zigzag stitch, so the width of the hole on the needles does not exceed the gap between them. Before starting work, make sure that the maximum dimensions of the zigzag correspond to the design and goals. In addition, the presence of two spools and the front type of threading is important.

Almost all Janome sewing machines allow you to effectively use double needles, so owners of equipment from this brand receive a lot of advantages and do not encounter any difficulties, paying maximum attention to sewing rather than adjustments.

When starting to use double needles, you need to immediately understand the features of the process. Typically, getting started consists of several steps, following following rules:

threading the upper threads with the obligatory loosening of the lower one, which is located in the bobbin, because it will be used by two threads from above at the same time;
adjustment of all used threads according to their tension parameter - experts recommend using thin threads with good elasticity;
you should make sure that the second thread is slightly thinner than the first - this will help make a better double seam.

It is also important that the sewing machine has paired racks for placing spools, two drivers and thread guides. This allows the top threads to be threaded correctly using separate pins without installing an additional pin. As for the refueling itself, use a double needle on suitable model Janome is very simple. The process is practically no different from using one needle - the rounded bulb is directed towards itself, and the cut is positioned away from the master. The right thread is threaded into the right needle, and the left thread in the corresponding direction.

Features of work

Thanks to the double needle, you can sew almost any product, performing decorative seams and hems, sewing on braid, assembling with elastic, making exquisite reliefs with cord and protecting the relief structure. But how to work with double needles correctly?

Having configured the threads correctly, you should adhere to following rules:

the rotation of the flywheel on the machine is self-directed;
features of the fabric used - the main parameter for choosing a needle and thread thickness;
in progress constantly monitor the tension, stitch and set stitch parameters;
to perform a neat stitch, it is necessary that the allowances are located on the right, and the working part of the product is on the left side;
the material is placed under the foot, a precise puncture is made and only then the foot smoothly lowers;
the threads must be pulled out behind the foot in compliance with the length from 8 to 10 cm;
at the final stage, the foot and double needles are raised, the part is moved back and the threads are cut using a special knife, which is located on the sleeve;
if the fabric comes off the rack teeth, the work stops immediately;
do not forget to place a piece of fabric under the presser foot after finishing sewing and turn off the device.

It becomes clear that using double needles for a sewing machine is practical and very convenient. Especially if your technology provides such an opportunity. Modern Janome sewing machines are ideal for working with double needles, moreover, they can even be used with triple needle designs, which significantly expands the possibilities during the work process. In addition, any machine of this brand is distinguished by functionality, power, ease of settings, impeccable build quality and record long service life. It is successfully used at home and bought at various sewing enterprises - factories, ateliers, fashion houses, clothing repair shops, etc.

Safety rules

Many craftswomen whose sewing machines allow the use of double-type needles often encounter thread breaks. This is a fairly common mistake that results from improper filling and adjustment. You should know that the peculiarities of the work require maintaining a slightly weakened tension - it is important not to pull too hard on the upper threads. The fact is that the bottom thread in this design is the only one, and it is secured by the two top ones. And if the tension is incorrectly applied, then a rupture will inevitably occur.

When starting to use your sewing machine and sewing with a twin needle, be sure to adhere to the following: safety rules:

if the machine is new and you have never worked on it - in detail read the instructions and recommendations given by the manufacturer;
to store all needles, not just double ones, you need to use a special container (needle bed) with a tight-fitting lid;
for additional safety of storing needles, you can tightly wrap them with thread;
if the needle breaks– place it separately in a closed box, otherwise using other needles you can get hurt;
constantly check the number of needles to avoid loss of accessories and accidental injuries;
If rust has formed on the needle, do not use it for work, as uneven punctures and difficult to remove stains may form on the fabric.

We can conclude that thanks to a double-type needle, you can expand the functionality of existing equipment and make your machine more convenient and productive. This is especially true for owners of Janome sewing equipment, since many models from this manufacturer provide everything necessary for the safe and effective use of such needles. Many craftswomen even prefer to specifically buy a machine of this brand in order to use double needles in their work, since with their help the work becomes high-quality and fast, and the resulting products are pleasing beautiful design and are in high demand.