New Year's crafts - warm hats for the Christmas tree. Small hat made of yarn. The sequence of recreating a Christmas tree hat from threads

Charming decorative little hats that resemble touching children's things are very useful for the winter holidays, and can be used for interior decoration, a small gift or even a Christmas tree decoration. The process of making such a cap can be mastered quite quickly, and can even be used for labor lessons.
For work we will prepare: plastic bottle round shape, bright yarn, scissors, decorative elements (rhinestones, beads, buttons, etc.).

We cut the plastic bottle in a circle, we get a closed ring. The width of the plastic strip is 1 cm. If the bottle is large in diameter (1.5 - 2 liter capacity), then the ring needs to be cut into two identical semicircles, which are connected into a ring and the ends are secured with tape to obtain a circle of smaller diameter.

We select bright yarn from skeins of thread that you have left over from previous projects, which were lying idle, and might not be needed at all. Yarn can be used in different thicknesses and textures: thin, thick, boucle, sectionally dyed, you can use threads after unraveling things, even if they are not whole.

We cut the thread into equal fragments, each piece should be 15 - 20 cm. Then we fold it in half, thread a loop through the plastic ring and tighten the thread.

If the threads are thin, then we use not one thread, but a whole strand. In the same way, we collect threads around the entire circumference of the ring, placing them tightly to each other.

We get a ring with attached threads. Then we collect the threads into a bundle and push it inside the ring, straightening the ends. The bottom part of the hat is ready.

We form a pompom. To do this, we tie the ends of the threads with additional thread, pull them tightly and cut off the ends. We cut off the threads that come out of the pompom, getting a round fluff on the top of the hat.

If the length of the yarn fragments turns out to be shorter than 20 cm, then the hat will turn out to be single-layer; for the pompom, you do not need to tuck the threads inside the ring, just tie the threads in a knot. We use threads different colors to make the hat more elegant.

Mini hat made of threads – simple craft, which is even possible to do to a small child. Naturally, under the strict guidance of an adult. This toy can be given as a gift to a loved one or decorate a fluffy Christmas tree with it.

By the way! To make the first such craft, you will need about 40-60 minutes. But after you master this simple process, the work will go much faster. U experienced craftswomen It takes no more than 20-30 minutes to make one small hat from threads. Thus, with a certain skill, in 3-4 hours you can make similar decorations for the entire Christmas tree.

Imagine that your New Year's tree will not just be festive and bright, but cozy and homely beautiful. Handmade toys in lately incredibly popular. And this is not surprising. Executed in uniform style, they make the Christmas tree a real decoration of any interior. And how many emotions the process of making New Year's toys gives!

Materials

To make a decorative toy hat, you will need:

threads for knitting, preferably wool;
cardboard sleeve (you can use a toilet paper or foil roll);
double-sided tape and scissors;
small pompom, beads, tinsel or buttons (optional).

By the way! To make the hat neat, the threads should be thick, high-quality, and convenient for work. The denser the thread, the larger the toy will be.

Step-by-step manufacturing process

Remember! Accurate work without haste and fuss is the key beautiful crafts. It is important to follow the proposed sequence of manufacturing steps. Then the work and its results will give you great pleasure. So…

First of all, cut a small ring from the cardboard sleeve. Its width in this version should not exceed 1.5-2 centimeters, but depends on the desired size of the future craft. This ring is the basis of a small hat. This is what will hold the threads. Thanks to the ring, the toy will retain its shape even if we hang it on the Christmas tree.
Next we will work with threads. The skein must be cut into pieces of equal length (about 30 centimeters). It is quite difficult to calculate the number of pieces that will be needed for the craft in advance. Their number depends on how tight the knitting is on your toy.
The most crucial moment - securing the first thread to the cardboard rim. To do this, we place the thread under the ring, forming a loop. Then we pull the ends of the thread through the loop and carefully, without pressing (otherwise you can wrinkle the cardboard), tighten it.
This work must be repeated with the remaining threads. It is important to place the segments tightly to each other so that there are no free areas on the ring.
When everything is ready, the upper part of the cap must be tied with one of the remaining pieces. Make sure the knot is strong(otherwise he can get untied, correct this incident in finished work it will be quite difficult).
The excess ends of the threads must be cut off, leaving a “tail” no more than 1.5 centimeters long.
Next, turn it inside out front side almost finished hat. Using a needle, we thread one thread-loop in order to hang the toy on the Christmas tree in the future. Then we put the hat aside: you need to make a pompom.

A variety of materials are suitable for the bubo:

bright tinsel (in this case the craft will be shiny and elegant);
a piece of cotton wool (it perfectly imitates a snowball, and therefore this hat looks especially winter-y);
beads, buttons;
remnants of thread, felt of the same shade as the craft itself.

Glue the finished pompom to the toy using double-sided tape. All! The craft is ready to decorate fir branches.

The proposed option for making a cap is not the only one. Today many varieties have been invented.

For example, you don't have to sew on a pompom. In this case, the shape of the hat will be more rounded. And in order for the shape to last better and longer, you can place a ball of crumpled paper inside the craft. It must first be wrapped with threads of the same color as the toy.

The size of the craft can be any. The wider the ring and the longer the segments, the larger the finished hat.

To make crafts, it is not at all necessary to run to the store and buy new threads. You can use any leftovers from past knitting projects..

By the way! Try combining threads in one craft different colors. The result will definitely please you: the hat will turn out bright and bold, or gentle and calm. Its “tonality” depends on the chosen color scheme.

We advise you to decorate the Christmas tree exclusively with colored hats, without using other toys. In this form, the forest beauty looks stylish and original. Hats can be different in color and size, with or without pom-poms, in a word, the way you see them. Don't be afraid to show your imagination, because New Year- a holiday imbued with miracles.

And we continue active preparations for the upcoming favorite holiday, the New Year! And this time we bring to your attention original version New Year's toys on the Christmas tree in the form of a winter cap.

Do these Christmas decorations It’s very simple to make with your own hands, and besides, you don’t need any supernatural materials to make them.

Thread hat

DIY Christmas tree toy Hat

To create a New Year's toy, Thread Hat, you will need the following materials: brightly colored knitting threads, a cardboard toilet paper roll, scissors.

Cut a piece about 2 cm wide from the cardboard tube. Now cut the threads into pieces of about 16 cm and start tying them on a cardboard strip (see photo). The more pieces of thread you tie, the more voluminous and neat the Christmas tree toy will look.

You can use threads of the same color or opposite threads of different colors and textures, thereby creating different patterns.

Now gather all the threads together and thread them inside, as if turning them inside out. Tie the threads at the top so that there are threads left to create a fluffy pompom.

Place a little cotton wool or a piece of padding polyester inside the hat so that the hat holds its shape.

Use scissors to trim the pompom.

Now tie a loop to the finished hat and hang it on the Christmas tree.

With such thread hats you can decorate not only the New Year tree, but also greeting cards, gifts, clothing and accessories.

You can also make a hat without a pompom. To do this, tie the threads before turning the cap inside out.

As an option, a miniature hat made of threads can be decorated with a pompom made from other materials. For example, it could be a piece of cotton wool, foam ball, large beads, buttons, etc.

Hello, dear readers! As we approach New Year's holidays Many people are starting to think about home decor, in particular decorating the Christmas tree. Earlier we already told you how to make a wide variety of decorations for the green spiky beauty, but today we will tell you how to make a hat from threads for a Christmas tree. At first glance, this element seems to be knitted, but in fact, everything is far from it! All the secrets of creating such an incredibly cute cap pendant will be revealed later in the review.

This is the kind of hat we will end up with.

Thread hat: master class.

To work you will need:

A roll of paper towels or toilet paper.
Scissors and stationery knife.
Threads (floss or yarn).

Stages of creating a hat.

We take a paper towel roll (we used a foil roll) and use a utility knife to cut it into rings 8-10 mm wide. Accordingly, how many hats you want to get in the end, so many rings should be prepared.

We cut the threads into pieces 15 cm long. It’s difficult to predict their total number at this stage, so don’t cut too much; if there’s not enough, you’ll cut more.

Take the first thread and fold it in half.

In this folded form, we pass the thread through the ring from the sleeve.

Then we thread the two free ends through the loop.

Tighten the thread.

We create a similar loop nearby and also tighten the thread. We move this thread tightly to the previous one.

According to the above scheme, we cover the entire ring with loops of thread.

And you pass them all together through the ring, as if turning them inside out.

Align all the threads with your fingers - place them in a column up.

Cut a thread about 15 cm long, fold it in half, and wrap it all around top threads, stepping back from the edge a little more than 1 cm (adjust as you wish). Tighten the loop, draw the loose ends around, and tie it into a knot. We cut off the excess threads with scissors.

We lay the hat on the table, smooth out the protruding ends, and cut it in a semicircle. If the pompom seems long, cut it some more.

Below the pompom we tie a string to the pendant.

And here is the result!

A hat made of threads on a Christmas tree will look simply magical; your guests will not even guess that this product is not knitted at all! They make such cute things New Year's decor more comfortable, warm and homely! Be sure to make these wonderful mini-hats, you will be very pleased with the results.

Hello, dear readers! As the New Year holidays approach, many begin to think about home decor, in particular decorating the Christmas tree. Earlier we already told you how to make a wide variety of decorations for the green spiky beauty, but today we will tell you how to make a hat from threads for a Christmas tree. At first glance, this element seems to be knitted, but in fact, everything is far from it! All the secrets of creating such an incredibly cute cap pendant will be revealed later in the review.

We will end up with a hat like this.

Thread hat: master class.

To work you will need:

A roll of paper towels or toilet paper.
Scissors and stationery knife.
Threads (floss or yarn).

Stages of creating a hat.

We take a paper towel roll (we used a foil roll) and use a utility knife to cut it into rings 8-10 mm wide. Accordingly, how many hats you want to get in the end, so many rings should be prepared.

We cut the threads into pieces 15 cm long. It’s difficult to predict their total number at this stage, so don’t cut too much; if there’s not enough, you’ll cut more.

Take the first thread and fold it in half.

In this folded form, we pass the thread through the ring from the sleeve.

Then we thread the two free ends through the loop.

Tighten the thread.

We create a similar loop nearby and also tighten the thread. We move this thread tightly to the previous one.

According to the above scheme, we cover the entire ring with loops of thread.

This is what you should get:

And you pass them all together through the ring, as if turning them inside out.

Align all the threads with your fingers - place them in a column up.

We cut a thread about 15 cm long, fold it in half, and wrap it around all the upper threads, stepping back from the edge a little more than 1 cm (adjust as you wish). Tighten the loop, draw the loose ends around, and tie it into a knot. We cut off the excess threads with scissors.

We lay the hat on the table, smooth out the protruding ends, and cut it in a semicircle. If the pompom seems long, cut it some more.

Below the pompom we tie a string to the pendant.

And here is the result!

A hat made of threads on a Christmas tree will look simply magical; your guests will not even guess that this product is not knitted at all! Such cute little things make New Year's decor more cozy, warm and homey! Be sure to make these wonderful mini-hats, you will be very pleased with the results.