How to iron a man's shirt well. How to iron men's shirts correctly. Techniques and procedures for ironing men's shirts

There are hardly many people for whom ironing shirts is their favorite pastime. Meanwhile, this familiar and necessary piece of clothing can tell a lot about its owner, because one is greeted by his clothes. A person wearing a wrinkled or clumsily ironed shirt, especially with long sleeve, often causes distrust and as a specialist, carelessness in clothing is involuntarily associated with carelessness in work. To prevent this from happening, it’s a good idea to learn how to stroke them quickly and correctly.

Where to start

So, before you is a pile of shirts that need to be given an impeccable look.

Iron heating modes

Modern irons are equipped with a temperature regulator. The ironing modes on them are indicated by dots; on some, the type of fabric is additionally indicated.

• one point corresponds to temperatures up to 110 0 C;
• two points - up to 150 0 C;
• three points - up to 200 0 C.

Table of ironing modes for different types of fabrics

If the label is missing and you do not know the composition of the fabric, set the minimum temperature, gradually increasing it until the fabric begins to smooth out. Add gradually. As soon as you feel that the iron is sliding worse, lower the temperature and let the device cool.

Prepare everything you need for ironing.

What you will need

• iron;
• ironing board or table covered with thick cloth;
• attachment for ironing sleeves;
• spray;
• Some products will require mesh or fabric.

Necessary accessories for successful ironing - gallery

The steam function of the iron greatly facilitates the ironing process Ironing board - a convenient device for ironing things Ironing sleeves is much easier with a sleeve holder A spray bottle is necessary to moisten dry tissue.

Preparing a shirt for ironing

Having prepared everything you need, start ironing.

Proper ironing of different types of long and short sleeve shirts

The most difficult thing, perhaps, is to iron men's shirts. Having learned this wisdom, dealing with other shirts will not be difficult.

Men's shirts

There are different opinions about the ironing order. General rule- first iron small and double parts.

Professionals advise starting with the collar.

Iron small and double pieces first, starting with the collar

Stage 1 - Collar

Once you've finished with the collar, move on to the sleeves.

Stage 2 - Sleeves

When ironing sleeves, also start with double parts - cuffs.

Advice! To avoid arrows, iron the center section first, then fold the sleeve and place it on a table or board so that the fold hangs over the edge. Then when ironing the iron will not hit it.

Stage 3 - Shoulders and Yoke

Stage 4 - Shelves and back

Immediately hang the ironed shirt on hangers and fasten the top button to prevent wrinkles from forming on it. Do not put on clothes right away, let them cool down and “rest” a little, otherwise the item will quickly become wrinkled.

Video instructions for perfectly ironing a men's long sleeve shirt

Shirts with short sleeves are also ironed using the same pattern. The sleeve is pulled over the narrow edge of the board or sleeve and ironed on all sides. Instead of a sleeve holder, you can use a rolling pin wrapped in a towel, or a roller made of tightly rolled fabric.

How to iron a short-sleeve shirt: video

Don't forget to smooth out the arrows on the sleeves. This method is suitable for ironing both on a board and on a table.

Polo

The polo shirt is designed for leisure and sports. It has a short fastening, a stand-up collar and short sleeves. It is made of knitted fabric, so over time it stretches and loses its shape. Let's look at how to iron it correctly.

Polo shirt - clothing for sports and leisure

Ironing on the table is performed using a different algorithm.

Advice! Now polos are produced from wrinkle-resistant fabrics. Dry these items on hangers, with the collar up, and they will not require ironing.

T-shirts are ironed in the same way; the absence of a collar simplifies the task.

Stretch

Stretch is not a fabric, but its property. This prefix means that the fabric has great stretchability and the ability to return to its original shape. This is achieved by adding a special thread that imparts elasticity.

A large percentage of elastic fiber reduces the wrinkleability of the fabric; products made from it do not require ironing.

When ironing stretch products, it is important to know the fiber composition. If it is unknown, set the mode to synthetic.

White

Ironing this item is no different from shirts of other colors, with the exception of one thing: the slightest dirt is visible on the white fabric. For a good result, it is necessary that the soleplate of the iron is perfectly clean. Run the iron over a clean cloth several times to make sure nothing is stuck to it, otherwise it will leave stains on the white fabric.

For hydration, use distilled or purified water. Make sure the ironing board cover is clean; if ironing on a table, place a white sheet on it.

Set the temperature correctly to avoid burning the fabric.

Woolen and wool blend

Such items are ironed through a damp cloth or steamed in a vertical position. Products with a relief texture are processed from the reverse side.

How to iron shirts

Ten years ago this question did not arise - there was no alternative to the iron. Now there are household appliances that cope with ironing no worse than an iron, and sometimes better.

Ironing equipment

• iron;
• steam generator;
• steamer;
• ironing robot-steamman.

The most important part of the iron is the sole. The quality, material and coating of the sole determine how easily it will glide over the fabric. This means how high quality the ironing result will be.

The better the sole of the iron glides, the better the ironing.

Modern irons are equipped with a thermostat, which allows you to iron things at the optimal temperature, a steam function and a sprinkler.

This is still the same iron, only more powerful than usual and equipped with a constant steam function. The steam jet power of this device is much higher than a conventional iron, due to which it easily smoothes any fabric.

The steam jet power of a steam generator is much higher than that of an iron

If the use of steam is acceptable for fabric, then this device is a godsend for the housewife.

Important! The steam generator produces only dry steam.

This is a device for smoothing fabrics with a stream of hot steam. A steamer is not an iron, and does not completely replace it. They are good for refreshing things, smoothing out wrinkles after storage, and getting rid of the smell of tobacco.

The steamer can be used to iron items in a vertical position, hanging them on hangers

The advantages of a steamer include the ability to iron things in a vertical position.

Steam manken

It is an inflatable mannequin for drying and ironing men's shirts and jackets. The thing is convenient, but the price is high, and it’s difficult to buy. Therefore, it is mentioned here for the overall picture.

The ironing robot-steamman will dry and iron any shirt without any problems.

It happens that the device breaks down, the power suddenly goes out, or you are far from the benefits of civilization, but you need to maintain your reputation.

How to iron a shirt without an iron

There are some tricks you can use to make your shirt look presentable.

Method 1

Small wrinkles can be removed by wetting your hands with water and running them over the fabric. Do this with a sharp movement from top to bottom. After this, shake the product vigorously and let it dry. It is important to keep your hands and water clean, otherwise marks will remain.

This method works well on linen products.

Method 2

Hang shirts made of silk, chiffon, synthetic fibers on hangers in the bathroom and turn on the hot water, directing the stream from bottom to top. Be careful not to splash onto the fabric.

After some time, the wrinkles will smooth out under the influence of steam.

Method 3

Moisten the shirt with a spray bottle and... put it on yourself. Under the influence of tension and your heat, the fabric will smooth out.

Method 4

Prepare a mixture of water, vinegar and fabric softener, taken in equal proportions. Pour the liquid into a spray bottle and spray the crumpled product - the wrinkles will smooth out.

This method is suitable even for white things; the composition will not leave stains. It won't work for synthetics.

How to iron fabric without an iron - video

1. Men's shirts are always ironed with front side.
2. Dark shirts should be ironed from the inside out so that there are no marks left on the front from the iron.
3. It happens that despite all efforts, the shirt cannot be ironed. Steam will not help in this case; the fabric must be moistened and ironed with strong iron pressure. The heavier the iron, the better the result.
4. In cases where the fabric is difficult to iron, moisturizing with water with the addition of conditioner or spray starch will help.
5. If the shirt has darts, iron them from the wrong side first. Vertical darts are smoothed towards each other.
6. Embroidery or print on a shirt or T-shirt is ironed from the inside out. Place a sheet of paper under the design to prevent it from imprinting on the ironing board.
7. To make shirts easier to iron, dry them on hangers and iron them slightly damp. Do not wring shirts or dry them in the machine.
8. Store knitted shirts rolled up to prevent wrinkles.
9. Do not leave ironed shirts on the table or ironing board as they may become wrinkled. Hang on a hanger and let cool, then place in your wardrobe.

Master class with comments on ironing a men's shirt - video

There is no limit to perfection, but we must strive for it. Having mastered the art of properly ironing shirts, you will be one step closer to ideal. And, perhaps, you will fall in love with this difficult, but so necessary work.

Every woman wants her loved one to always be neat and well-groomed. A neat and clean man in a perfectly ironed shirt is pleasant to look at. But ironing men's shirts is a real challenge for many.

This must be done with high quality, because a shirt is a man’s face and it doesn’t need wrinkles. Ironing a men's shirt is not difficult, you just need to know a certain sequence, principles and some rules, which we will now share with you.

Before turning on the iron

You need to dry a clean, washed shirt flattened, hanging it on a trempel (hanger). There is no need to wait for complete drying; ironing a slightly damp product is much easier and faster. If the fabric is still dry, evenly moisten it with a home spray bottle about an hour before ironing. Or wrap your shirt in a damp towel for a few minutes.

However, this does not apply to silk shirts. They should be ironed exclusively dry through a damp cotton cloth. Spraying with water or ironing through cheesecloth may cause stains.

Do not rush to turn on the iron until you have examined the label on the shirt. The composition of the fabric is indicated there, as well as recommendations from the manufacturer regarding the ironing process. It takes very little time, but it saves you from the possibility of ruining the thing.

A high-quality iron plus a good ironing board will make the process more pleasant and comfortable. You only need to fill the iron with distilled water, but not tap water. Otherwise, salt deposits may form in the tank and stains on things during ironing cannot be avoided. In addition, do not forget to periodically clean the soleplate of the iron.

Select the ironing mode according to the type of fabric

To avoid accidentally burning your favorite shirt dear man, carefully set the iron setting to the appropriate type of fabric. Memorize or hang in a visible place a cheat sheet of material compliance with ironing modes:

• 100% cotton - 150 degrees, wet steam, strong iron pressure.
• Crinkled cotton - 110 degrees, no steam.
• Cotton + polyester - 110 degrees, a little steam.
• Linen - 210-230 degrees, a lot of wet steam, intense pressure.
• Cotton + linen - 180-200 degrees, abundant steam, strong pressure.
• Viscose - 120 degrees, no steam.

Step-by-step plan for ironing shirts

Having washed the shirt, prepared everything you need and studied the label, you can finally begin the great action in the following order:

• Collar.

You should always start from the gate. First, iron the wrong side of it, moving the iron from the corners to the middle. Then iron the front side in the same way. If you iron from the middle, then ugly folds will appear in the corners, which should not be there at all. To prevent the collar from losing its natural correct appearance, do not smooth it by bending it along the stand.

Many people mistakenly finish ironing a shirt with the collar. This is wrong, because by ironing the collar, you will wrinkle the sleeves and back again.

• Cuffs.

For long sleeves, start ironing from the cuffs. Do this according to the same principle as ironing a collar: from the inside, then from the front side. You need to iron double cuffs like this: unscrew them completely, iron them on both sides without folds, fold them and iron them again, ironing them evenly along the fold.

• Sleeves.

Some ironing boards come with a special board for ironing sleeves. But even without one, the art of ironing a shirt can be mastered.
Carefully fold the sleeve in half so that the seam is in the middle. Press each sleeve on both sides from seam to edge. Then lift and unfold it so that the edge is centered and iron again.

The arrows on the sleeves should not be ironed. This is considered bad manners, but is only permissible if there is absolutely no time for ironing, the shirt is needed urgently and the man definitely will not take off his jacket.

• Shelves.

Start with the front where the buttons are sewn. In men's shirts it is always on the right. Lay the shirt on the narrow part of your ironing board and move the iron from top to bottom. Go around buttons and don't crease pockets. Pay special attention to the spaces between the buttons: stretching the fabric slightly, run the tip of the iron over it. Iron the second shelf, which has hinges, in the same way. It’s even easier to do this, because there are no buttons on it.

• Back.

The back is ironed from right to left from the front or back side, depending on the material. Iron the right half of the back from bottom to top, the yoke, and then the left half. Finish ironing by moving the iron along the left seam from top to bottom.

Ironing nuances

1. Shirts made from viscose fibers should be ironed with extreme caution, as they are very sensitive to high temperatures.
2. A woolen shirt should be ironed only from the inside out and should be sufficiently damp. This way, you can even restore your shirt to its original size if it shrinks during washing.
3. Shirts with shimmer, embroidery or a relief pattern are ironed only on the reverse side so that the shimmer does not fade and the embroidery or design looks more voluminous.
4. Dark shirts must also be ironed from the inside out to avoid the appearance of a shiny sheen.
5. Do not hold the iron in one place for too long and do not press it too hard against the surface.
6. A special extension or a regular rolled up towel tucked into the sleeve will help to greatly facilitate the process of ironing sleeves.

How to quickly and efficiently iron a shirt without an iron?

Sometimes in an emergency situation when you don’t have an iron, such knowledge may come in handy. For example, on a trip or during a sudden power outage, when the husband urgently needs to run to a meeting. Your loved one will probably be pleasantly surprised if you skillfully smooth out the crumpled folds on his shirt without the help of an iron.

• Method No. 1. If the shirt is wrinkled in one place or all over, but not very much, then it is best to do the following. Lay the crumpled shirt on a flat surface and sprinkle it with water. Gently pull the fabric in all directions to straighten it. Wait for it to dry.
• Method No. 2. A heavily wrinkled shirt can be quickly ironed using this method. Hang the shirt on the trempel and take it to the bathroom. Close the door tightly and open the hot water tap as much as possible. After some time, under the influence of steam and its own weight, the shirt will begin to straighten. Then put it on your beloved husband and walk over it with wet hands. That's all, the shirt is ironed, and the man is slightly confused, but pleased and immensely grateful to you.

Every bachelor and every housewife must be able to properly iron men's shirts. Perhaps a man will not succeed perfectly the first time, but experience will come with time.

The ability to iron a shirt yourself is a necessary skill for any man. Every time resorting to the help of your spouse, mother, sister and even mother-in-law is clearly not an option. Moreover, not all women (no offense) are able to do this correctly and as carefully as the person who will have to wear the item. And if we are talking about your favorite men's shirt from a prestigious brand, it is certainly better to rely on your own strength. There's nothing complicated about it.

WHY DOES A MAN BE ABLE TO IRON A SHIRT?

Reaching the maximum effective result. No one can be interested in perfect form shirts more than the owner.

Ironing yourself will allow you to pay attention to the smallest details, the importance of which cannot be underestimated. Even minor wrinkles on a shirt can spoil the impression of the best men's suit from a famous brand.

Representatives of the fair sex may simply not be around, for example, during a business trip. And taking your shirt to the dry cleaner every time is not best solution. Plus cost savings.

Reduced wear and extended service life. Ironing a men's shirt correctly is the ability to concentrate on problem elements (collar, cuffs), and on other areas once again do not apply pressure.

Ironing a shirt takes very little time, but the skill lasts a lifetime.

WHERE TO START IRONING A SHIRT

In order to iron a shirt, a man must have the necessary equipment at his disposal - ironing board And iron. It is advisable to use a good Teflon-coated iron with a steam spray function. Place the ironing board in a convenient place to make ironing your shirt as comfortable as possible. Of course, the item must be pre-washed and dried.

Before you begin, read the manufacturer's instructions for caring for your shirt. Typically, such information is indicated on a special label with inside shirts at the bottom left. Pay attention to the iron icon, which should not be crossed out. Perhaps this type of shirt cannot be ironed at all.

One point. The shirt is synthetic. Keep heat low (175 to 230 degrees).

Two points. Shirt made of silk or wool. Keep the heat at medium (250 to 300 degrees).

Three dots. Cotton shirt. Keep warm on high level(320 to 400 degrees) and use steam.

Wait until the iron heats up, turn the shirt inside out, turn on the music or TV and start ironing.

IRONING A SHIRT - STEP-BY-STEP INSTRUCTIONS

Start ironing the shirt from the back where it collects greatest number folds while wearing. To do this, completely unbutton the buttons and lay the shirt along the ironing board. First, take a good look at the lower wide part and remove any unevenness. Then move on to the shoulders.

Place one shoulder side through the narrow part of the board and, using moderate pressure, guide the iron toward the bottom of the shirt, working from top to bottom. While doing this, carefully hold your shirt and be careful. After all, you need to not only get rid of old wrinkles, but also avoid the appearance of new ones. Use steam if necessary. Do a similar procedure with the second shoulder and move on to the sleeves.

Ironing a long-sleeved shirt is not easy. This is one of the most inconvenient elements. To begin, place one sleeve of your shirt on the board. Using your hands, carefully align the edges of the sleeve along the seams and eliminate any unevenness in the material. Start from the lower armpit area and slowly work your way towards the cuff.

In order to form straight arrow carefully go along the upper part of the sleeve (along the seam). If there is no such goal, then do not bring the iron to the very edge and especially do not press hard. Steam thoroughly and iron the cuffs. After this, repeat the steps with the second sleeve and move on to the collar.

If the design provides, remove the detachable collar and unfasten the buttons. After straightening it, place the collar on the ironing board with the back side facing up. Spray thoroughly with water or steam and wait 30 seconds. Then work the iron carefully from the center to the edges.

Typically the collar material is thicker and stiffer than the rest of the shirt, so iron with a little more force. Next, fold the collar over and lightly run the iron along the front seam to sharpen the corner.

The final step is ironing the front of the shirt. Pay special attention to the area near the collar, as this area is located near the neck and catches the eye.

Use the narrow side of the board. If there is a pocket, carefully guide the iron from the center outwards (as with a collar) to avoid wrinkles. Slowly, to avoid damage, go over each section of the shirt between the buttons.

Ironing a slightly damp shirt will be more effective, especially cotton fabric. If the item has dried completely, use a water spray to remove wrinkles.

Be careful not to get the iron on shirt parts such as buttons, labels, metal fasteners or zippers (if any).

Keep your iron in good condition. The surface must be clean and free of mineral deposits.

Place the shirt on a hanger (at least the back of a chair) immediately after finishing the process.

Break down various stereotypes about the division of household labor between men and women. Learn to iron a shirt yourself and add another useful skill to your repertoire of basics men's style. Do not forget that you need to choose the shirt correctly from the beginning and then properly care for the item.

Some people find ironing difficult because they don't follow the basic rules. Burnt fabric, unsmoothed folds and creases, broken or torn buttons after dry cleaning, do you recognize yourself?

Then this article is for you. The first thing to keep in mind is that the composition of the fabric determines the way in which it should be ironed.

Combinations on your iron will help you achieve your ideal heat setting. Secondly, you need to use an ironing board to iron your clothes.

In addition, clothes should be ironed so that wrinkles are removed and new ones are not formed. Below are tips on how to iron a shirt using correct technique.

Proper ironing of men's shirts is performed in the following sequence:

1. The ironing process begins with the collar because it is the most visible part, especially when worn with a suit. To iron the collar, you need to unscrew it and start from the bottom, and then, slowly pressing the iron, move it from the corners to the center. The next thing to do is to turn the shirt over and repeat the process on the other side of the collar;
2. Cuffs, when worn with a suit, are the second visible part of the shirt and require a lot of attention. Just like the collar, they are ironed on the inside first, then turned over and ironed on the outside. When ironing cuffs, you need to be careful not to iron over the buttons;
3. the front of the shirt. Ironing the front should begin from the side on which the buttons are located, gently pressing the iron around the buttons;
4. back. To properly iron the back of a shirt, you need to place the back of it on the ironing board so that one shoulder is placed on the tapered edge of the ironing board, this helps keep the back in the desired position for ironing. The same should be done by changing the sleeve and ironing the second part of the back;
5. sleeves The sleeves are the most difficult part of ironing a shirt. The problem with sleeves is that without a special board with a cutout for the sleeves, you will have to iron two layers, so you need to be careful and make sure that the fabric lies flat.

Ironing modes for shirts by fabric type

Cotton shirts

Cotton items should be ironed slightly damp, and the part being ironed should be sprayed with water. You need to work the iron longitudinally, and not in a circular motion, so as not to damage the material.

• A 100% cotton shirt will require a temperature in the range of 130-160 degrees with strong pressure and wet steam;
• from pressed cotton - 110°C and without moisture;
• a cotton item with linen will require a temperature of 200°C and wet gauze with strong pressure;
• For synthetic cotton, 100°C with low steam will be enough.

Made from polyester

These definitely require the use of gauze or a thin cotton cloth to avoid the soleplate of the iron coming into contact with the fabric because polyester is an extremely heat sensitive material.

You need to iron such a thing at a temperature of no more than 80 degrees with light pressure to avoid melting the fibers and using weak steam.

Linen shirts

Chiffon and silk Shirts are ironed at a temperature of no more than 70°C without moisture or steam.

Viscose and knitwear- 120 and 80°C, respectively, using gauze and low steam. Items made from these materials should be ironed from the inside out.

For thicker fabrics, ironing both sides of the fabric will give the best results, and you can also check the product label for the correct temperature to iron your shirt at.

If there is no label, you can determine the temperature yourself by setting the minimum temperature and increasing it until the wrinkles begin to smooth out.

Dark-colored items, regardless of material, should always be ironed inside out to avoid shine caused by the iron.

Preparing the shirt for ironing

• The shirt should be ironed only after washing, as some dirt after ironing the item will forever remain in the fabric;
• if on yours washing machine there is an “easy ironing” function, then use it;
• There is no need to wait for the item to dry completely, let it be slightly damp. If you decide to iron a dry shirt, it is better to moisten it with a spray bottle and briefly (for about 10 minutes) place it in a bag or wrap it in a towel, this will help it to be moistened equally throughout the fabric;
• on the label, study the information about the shirt and adhere to the specified temperature regime that is necessary for the material;
• On the collars of men's shirts there are plastic bones in small pockets, the so-called retainers, they need to be removed before ironing, but it is better to do this before washing.

How to iron a long and short sleeve shirt

The basic principle that should be followed is that small and double parts begin to be ironed first.

Using the following instructions, in the given sequence, you can perfectly iron a long-sleeve shirt and not leave wrinkles on the already ironed surface.

1. Gate. Its fold does not need to be smoothed, it should be natural.
2. Cuffs. First, the wrong side is smoothed, and then the front side.
3. Sleeves. First of all, the seam is smoothed out, and then the sleeve itself.
4. Shelves. You need to avoid folds on the pockets and carefully go around the buttons.
5. Back. Move the shirt along the board to help iron the back from seam to seam.

Shirts with short sleeves are ironed in the same way, only a little faster. The sleeve must be pulled over the narrowed edge of the ironing board or onto a special sleeve holder and ironed on all sides.

How to iron a shirt collar correctly

It is advisable to iron the collar of a man's shirt while damp. You should start from the reverse side from the corners of the collar to the center.

The front side is also smoothed. You need to iron without pressing so that the fabric does not move to the sides, forming folds.

How to iron a shirt collar so that it stands up?

It depends on the fabric. If the material is of good density, it is enough to simply smooth it on both sides; if the fabric is soft, you can starch the collar with a solution, dry it and iron it in the desired shape.

Ironing the sleeves

Shirt sleeves should be ironed without arrows. This is done like this:

1. the sleeve is folded in half, seam up and it should be located in the middle;
2. the seam is smoothed, the sleeve is turned over and also ironed;
3. The sleeve is folded along the seam and ironed from it to the edge, starting from the shoulder and down.

Are arrows needed on sleeves?

Many have wondered: is it correct to iron shirt sleeves with or without arrows? According to etiquette, it is customary to wear a shirt without arrows.

But if a person does not plan to take off his jacket, arrows on the shirt are acceptable. It follows from this that arrows on the sleeves are in bad taste.

We iron the yoke and shoulders

The shirt is stretched on the ironer, its narrowed end, with the collar towards the board, the fabric is straightened.

Iron the shoulders and yoke parallel to the collar. The seams connecting the shirt to the collar, as well as the armholes, are ironed.

Ironing the shelves and back

We place the shelf on the board, shoulder to the narrowed part. You need to start ironing the shelf from the front side. The spaces between the buttons are ironed from bottom to top.

Then you need to move the iron to side seam and back. Lastly, the left shelf is ironed.

How to iron a shirt without an iron

Let's consider such tricks as the ability to iron a shirt without an iron.

Method number 1 - Wet hands

If the item is not too wrinkled, you can smooth out the wrinkles with damp hands by running your hands over the fabric from top to bottom. Then shake the shirt and let it dry. Linen products are well suited to this method.

Method No. 2 - Steam bath

Hang clothes on hangers in the bathroom and run hot water, close the bathroom door. The water must be so hot that steam is formed, since it is under the influence of steam that the unevenness disappears. The fabric will be smoothed in 15-20 minutes. Splashes of water should not fall on the item.

Method number 3 - Put it on yourself

Put a wet shirt on your body. The tension and body heat will smooth the fabric.

Method No. 4 - Leveling solution

A solution of vinegar and fabric softener is added to water 1:1:1. Shake the resulting solution and spray the surface of the clothing. Then dry it, preferably in the open air. The method does not work with synthetics.

How to fold a shirt without wrinkles

If you fold your shirt correctly, you won't need to iron it again. It's much easier than it might seem.

1. you need to put the shirt with the buttons down;
2. the sides fold from shoulder to shoulder;
3. the sleeves lie on the side of the shirt towards you;
4. the bottom of the shirt is rolled up, forming a neat rectangle.

Iron alternative

Among the unusual methods for removing wrinkles from things, the following can be noted:

Steam generator

This device is quite similar to an iron, but in terms of the specifics of its operation it differs in that it constantly supplies dry steam with a powerful jet. Capable of smoothing out fairly wrinkled items.

Steamer

The steamer removes wrinkles by supplying hot steam, and at the same time disinfects the item. You can iron in a vertical position. However, not all fabrics are suitable for this method.

Steam manken

An ironing robot, a mannequin, in the shape of a human torso, is designed for quick drying and smoothing of all clothes that are worn on the torso.

The better way to iron shirts, with a steam generator or a steamer, depends on the frequency and amount of poorly ironed (complex, unusual cut, decoration on things) clothes. The first option is preferable.

Useful tricks

• A man's shirt should be ironed right side out.
• If you cannot iron the item, moisturizing and pressing firmly on the iron will help.
• Fabric that is difficult to iron can be made more pliable with a solution of conditioner, water and starch.
• The print on the product or embroidery must be ironed from the inside.
• For easy and efficient ironing, shirts can be hung to dry by hanging them and ironed when damp.
• To avoid wrinkles on knitwear, it is better to store such products with a roller.