Cocoon dress pattern with pockets. Cutting and sewing a cocoon dress with pockets in the side seams from scratch for beginners. Cocoon dress pattern
This article will discuss the pattern of the “Cocoon” dress for beginner couturiers, and therefore the level of complexity of sewing in this case is simple.
Before starting the pattern, I would like to pay special attention to such a moment as choosing the size. In the example under consideration, Pg is about 10 centimeters, Pb is about 5-7 centimeters.
The model is suitable for the fair sex, regardless of their body type or age group. You can use any fabric for sewing, however, thin silk is not recommended.
The set of patterns includes the following details: “front-back”, “side-valance”, and also “burlap for pocket”, since our dress model will have pockets (Fig. 1).
The size of the fabric used will be about 2 meters. To minimize costs, we recommend using lining fabric to pattern the “burlap pocket” piece.
Despite the fact that the level of tailoring of this dress is suitable for less experienced tailors, you may still encounter some difficulties during cutting. Therefore, we propose to analyze the cutting of the “Cocoon” dress in more detail.
Let's start making patterns. Such a detail as a “back-shelf” should be made in two variations, and therefore we cut out a front with a neckline and a deflection in the lower part of the sleeve and a back with a sprout and a convex sleeve.
Patterns for details such as “barrel valance” and “burlap” are universal for all types of figures. Particular attention should be paid to notches, which are often mentioned by teachers in sewing courses. The first step is to make notches on the patterns, then apply marks to the fabric, not forgetting about notches on the seam allowances of the product parts.
Having made the patterns, you need to fold the fabric in half, thereby aligning the edges and place them on the cutting table parallel to the edge.
Next, we proceed to the patterns of the shelf and the back, laying them in a “jack” (Fig. 2) so that the half-skid shelf is adjacent to the fold of the fabric, and the middle seam of the back is to the edge. The “barrel valance” detail must be made in 4 copies, and the “burlap for pocket” – in two, since we will need to lay the patterns to the fold of the fabric or cut the burlap into a spread. The leftovers will be useful for cutting out facings.
For allowances we leave one centimeter each, except for the sprout-neck, since it must be cut out beyond the outline line of the pattern. To bend the bottom of the dress you will need three centimeters.
Special attention should be paid to the facings for processing the sprout, the neckline and the bottom of the sleeves (Fig. 3). They should be cut out using the same patterns that were used for the front and back from dublerin, and remember that seam allowances are not needed here.
First of all, it is necessary to outline the cut itself, which will then be processed with this facing, as well as the cuts that are partially adjacent to it. The width of the facing parts should be up to 5 centimeters.
After that, we need to glue them and cut them out. I would like to pay special attention to the fact that it is necessary to cut with seam allowances.
If there is not enough fabric for facings, cutting with additional stitches may well be the solution to the problem.
How to sew a “Cocoon” dress with pockets?
One of the most important roles in sewing the “Cocoon” dress is given to seam notches, without which it is not possible to assemble the product.
We begin to process the middle seam of the back with a “zipper” (Fig. 4), then to the seams of the shoulder-sleeve and the fragments of the seams located on the side, from the blue cross to the bottom. Then we need to process the seam fragments in the lower part of the sleeve, which are clearly represented from the bottom to the green mark. We do not lose sight of the two valance barrels that need to be sewn together - from the green cross to the bottom. It is also important not to forget to sweep the seam sections, and then proceed with the wet-heat treatment.
After all the above mentioned seams have been processed, we proceed to the pockets. Using the “burlap” piece, you need to grind the entrance to the pockets; this interval is indicated from the blue cross to the red mark.
All that remains is to process the neckline, the bottom of the sleeve and the bottom of the product.
As you have already seen, this process, although a little confusing, is not complicated. We assure you that you will certainly succeed, even if you do not have much experience in this matter. The main thing is not to save much on fabric.
The cocoon coat model has been at the peak of fashion for several seasons, thanks to its comfortable cut and elegant silhouette. This coat traces its fashion history back to the middle of the 20th century, from the moment when it was first demonstrated on the catwalk, and already at the end of the 20th century this model began to be considered a classic. The pattern presented in this article will help needlewomen sew such a thing with their own hands.
The cocoon coat, unlike many other coat models, is suitable for girls with different body types. But if you decide to get such a thing, it is important to remember: the size of the coat must clearly correspond to your size - only in this case it will look elegant and will focus attention on the advantages of your figure.
It is also necessary to understand that the style of a cocoon coat in itself is unusual and interesting, so you should not overload the image with additional accents, for example, voluminous patterns. A cocoon coat made in classic colors, namely gray, white, black, brown or combinations thereof, will look most appropriate. Coats of these colors can be easily complemented with original accessories, for example, scarves or handkerchiefs, or a handbag.
Considering that this model creates the effect of a wide, voluminous top, it is better if the bottom is visually narrowed, for example, combining a cocoon coat with a pencil skirt or sheath dress. It is also better to choose appropriate shoes.
Cocoon coat pattern
The cocoon coat pattern proposed in this article will allow needlewomen to sew a beautiful and elegant thing. In general, the cut is quite simple, you just need to take the correct measurements and choose the fabric.
Often, cocoon coat models have a one-piece sleeve or dedicated gussets. Thanks to video tutorials, you can understand the principles of sewing a one-piece sleeve, understand how to correctly sew gussets into the main part of the product, so cutting and sewing a coat will not take too much time.
In order to make the model you like, needlewomen can download the pattern of a cocoon coat and be guided by it in the process of sewing the item.
Different models of cocoon coats
Every fashion season, leading designers demonstrate their versions of cocoon coat models. At fashion weeks you can see both coat models that are classic in color and decoration, as well as designer models that are distinguished by non-standard colors or original decorative elements.
Video selection especially for you
Pattern for a cocoon dress and a master class on sewing the most popular size 44-46, with interesting striped pockets. The pattern is quite simple, and to model it you can use your own T-shirt that fits you. This dress is made from knitted fabric; choose a fabric that does not require edge processing. If you don’t know how to sew knitwear on a regular machine, then first study the cheat sheet:
Cocoon dress pattern
Lay out the pattern on the fabric. Don't forget the seam allowance and allowance for the back of the dress as it will be in two pieces. Fold the fabric in half, the front of the dress on the fold, the back on the other edge.
Seam pattern
How to sew a cocoon dress - cocoon dress pattern
When all the details of the dress are cut out, we mark the places for the pockets
We cut the pocket - 4 identical parts
Sew on the pocket details, then make side stitches on the dress and sew on the pocket details.
Sew the back parts of the dress and sew in a zipper. If the fabric requires processing, then after sewing in the zipper, process the neckline and hem of the dress.
How to sew a Gucci cocoon dress + pattern. This dress is fantastically stunning and comfortable! Looks great on any figure. The cocoon style is incredibly slimming and hides figure flaws.
How to sew a Gucci cocoon dress - model the pattern
To construct this stunning dress we will need a well-fitting t-shirt or the following measurements:
- Osh - neck circumference
- DP - shoulder length
- Vg - chest height
- About - hip circumference
- Di is the length of the dress.
Fold the T-shirt in half and transfer the lines of the neck and shoulder from it. If there is no suitable T-shirt, you can build a neckline. 1/6 Osh + 0.5 = neck width. Divide the resulting width by 3 = back neck height. Add 1 cm to the width = height of the shelf neck.
To build a shoulder, set aside 8 cm from the point of the base of the neck and down 2.9 cm. Draw a line through this point and the point of the base of the neck and continue it further so that its length becomes equal to the measurement of Dp (shoulder length).
From the point of the base of the neck down, we put the measurement Bg (chest height) + from 0 to 15 cm. The more increase you take, the more voluminous the dress will be (but at the same time less comfortable). The photo shows an increase of ~10 cm. We draw a horizontal line. Next, we connect the end of the shoulder line to this horizontal line so that the new line runs at an angle of 45 degrees to our horizontal line.
Along the middle line of the back we set aside the length of the dress and to the side 1/4 of the volume. We connect the resulting point with the horizontal line of the chest.
Next, we copy the contours of the drawing from the neck of the shelf (deeper) and cut horizontally across the chest. We place one part mirror-like to the sleeve line, the other to the side line. Round the lines marked in the figure. From the corner of the sleeve we measure 15 cm in both directions (at this point the sleeve hole will end). And we draw allowances of 1 cm for all cuts except the bottom (there, depending on the processing, from 2 to 4) 
