DIY summer headband. A beautiful DIY fleece or drape headband. Tights bandage

Do you play sports? You lead household? Do you want to long hair didn't they bother you? We present to you the author's detailed master class how to make a bandage with your own hands.

Materials and tools

To create a headband with your own hands, you will need the following materials:

— knitted fabric (3 different colors);
- tulle fabric;
- a beautiful button;
- rubber;
- thread and needle;
- centimeter;
- chalk (or soap);
- pins;

Notes for the master class

It’s better to sew on a machine, it’s faster. If the machine does not sew knitted fabric, then you can place a satin ribbon or a thick piece of fabric along the entire length.

1. Take knitted fabric. In this master class the color is soft pink. We measure the circumference of the head with a centimeter. Mark the length of the bandage on the fabric with chalk. Head circumference minus 2.5 cm. We can make any width. In this example, about 10 cm.

2. Fold in half and secure the bandage with pins.

3. Sew by hand or on sewing machine.

4. Turn the bandage over to the other side. We bend the fabric and stitch the edge of the bandage by hand, then tighten the thread.

5. Insert the elastic into the bandage and sew it on. The width of the bandage should be equal to the width of the elastic band.

6. On the other side we do the same.

7. The next step is to decorate the bandage. From gray knitted fabric we cut out a small strip, about 18 cm long and 4 cm wide. We sew and tighten the thread. Sew the ends together.

8. Cut out a small strip of tulle fabric pink color. Smaller in length and width. Fold in half. We stitch and tighten the thread, sewing the ends.

9. From a thin strip of white knitwear we make the same flower. Smaller in length and width.

A handmade headband is a beautiful decoration that is suitable not only for a little girl, but also for an adult woman. This product is practical and convenient. Making it is quite simple, following step-by-step instructions. The main thing is to think through the idea carefully, prepare everything necessary materials, tools and get down to work.

For them you need to prepare an elastic band or ribbon, soft fabric (foamirin or felt), a needle, thread, glue and a measuring tape.

The work begins with making a blank for the flower. To do this, cut 4 circles from a piece of cloth. Fold the first one in half and glue the center. Place a second one on top, folded in the same way, and glue the circle again. Repeat the same steps with the remaining two blanks.

While the glue dries, measure the circumference of your head and cut the resulting length from an elastic band or ribbon. Sew the ends of the base and sew the already made flower to it.

Another version of the bandage can be made from the same materials:

Cut 10 circles from the fabric and sew them in the center.
Tighten the main thread to form a flower.
Cut a length from the ribbon or elastic band corresponding to the circumference of your head.
Sew the ends together and sew a flower to the product.

This headband can be decorated with several flowers or a bow, which will also look beautiful.

Product for baby

For such a bandage you will need alone nylon tights , needle and thread, scissors, centimeter, finished flower, decorations. Before sewing a headband for a girl, you should measure the circumference of the head.

Knowing this information, You can start making a baby product:

Cut off the base of the tights. It should be 5-7 cm less than the head circumference.
Sew the ends of the base and sew a nylon elastic band to it so that it looks like a bow.
Decorate the headband with a flower and other decorative elements.

Another simple option on how to make a headband for a girl. For it you will need an elastic band, a wide satin ribbon or fabric, thread, needle, scissors, and decor.

Manufacturing:

Measure your head circumference.
Cut a piece of elastic 2-3 cm larger than the circumference of your head.
From material or tape, sew a rectangle in 2 layers, the length exceeding the elastic by 8-15 cm. Leave one end of it open.
Insert an elastic band inside the rectangle.
Gather the fabric/ribbon and sew up the edges of the elastic and fabric.
Decorate the product with beads and an artificial flower.

Motif

Lace will be used as the base here. In addition to this, you need to take a soft cloth, a ribbon, a needle and thread, a flower, and a glue gun.

We make the decoration:

These hairbands can be worn for special occasions, themed parties, photo shoots, for every day.

Homemade Solokha

For such a product you need an elastic band, the width of which is 3-4 cm, and cotton fabric in two colors. The Solokh headband pattern is designed for a head circumference of 50-52 cm. The width of the headband is 4-6 cm.

You need to cut 2 pieces of 20 cm from fabric, 11-13 cm from elastic. If the latter material is tight, then it is better to cut a little more by 2-3 cm. The resulting parts need to be sewn with the large side. There is no need to sew the beginning and end of each segment.

Not reaching the seam 1-2 cm, cut the edges at the folds. Turn out the resulting blanks and iron them. Then you need to take the elastic band and the part that will be in the middle of the bandage. Insert the elastic band inside the workpiece and sew on both edges. You will get an elastic band in a fold.

Now you need to sew all the parts together. To be safe, it is better to do several lines. This creates a bandage that can be tied.

You can make a straw on your head with your own hands in another way. For this you need fabric 11x80 cm, a piece of wire 170 cm long and 2 mm in diameter, and sewing supplies. Instructions:

Fabric decoration

For such a product you need to take a piece of fabric, sewing pins and thread, scissors, a measuring tape, and a wooden skewer.

First of all, you need to cut out 2 identical strips of 90x3 cm from the fabric. Iron them, place one on top of the other and sharpen the edges with scissors. Put the strips together front side and pin together with sewing pins. Sew around the entire perimeter, leaving a small hole on one side.

Cut off the ends from the inside and turn the workpiece inside out. For this you will need a wooden skewer. Her must be attached to the tip of the product and push the material towards the previously left hole. Do the same with the other ending.

After the bandage is turned out, it must be ironed. Now the entire product should be stitched around the perimeter.

Pin-up style

A headband in this style allows you to emphasize the individuality of its owner. For the product you will need a piece of bright fabric 10x70 cm, wire 150 cm long, thread with a needle.

Manufacturing instructions:

Take the material and fold it in half with the wrong side down.
Sew the edge.
Leave 5 cm unstitched on one side.
Insert a wire bent and twisted into the resulting hole.
Sew up the hole.

There are many other ideas and variations on how to make your own headband. You need to be patient and create, creating beautiful masterpieces.

Girls love to dress up and try on different accessories. One of the most sophisticated and neat is the headband. An alternative decoration is a headband, but this accessory is much more common among the fair sex. This head accessory is an improved version of the headband that can be worn with different outfits, turning them into finished images.

It doesn’t take a lot of time or materials to make a beautiful head decoration. All you need is pieces of fabric, thread, scissors, a needle and satin ribbons. You can decorate the accessory in the most in different ways- beads, ribbons, finished brooch. Making a baby headband with your own hands is a pleasure.

Benefits of a headband for girls

Such original accessory has many advantages:

Tying knots takes no more than five seconds, and if there is a special elastic band inside the bandage, then even less.
The headband will decorate both everyday and festive outfits.
This hair accessory looks great with any hairstyle - loose hair, ponytails or braids.
You can do extraordinary things with a bandage greek hairstyles and diversify your child’s style.
The accessory allows you to pull short, unruly hair back, and it will not interfere with the child during everyday activities.
A wide accessory does not require constant combing of unruly hair.

The headband can be combined with any clothing: skirt, jeans,... Such an accessory suitable for a newborn baby or girl preschool age. The accessory will immediately add zest to the outfit, making it beautiful and complete. A child's look changes depending on the accessories added to the outfit, and a headband is great for changing up the look.

Base for dressing

To make an accessory with your own hands that will fit comfortably, you need to measure the circumference of the child’s head and cut a rectangle from fabric with a margin threading the elastic. To measure the circumference of your head, use a centimeter tape. In no case should it be tightened too tightly, because even the most elastic material can put pressure on the child and create discomfort. You should not use lace or thread, as these materials give a large error. Due to the stretching of the lace, the size of the headband may not match the circumference of the child's head.

It is better to choose soft, elastic fabric for the base. You should rely on the season in which you plan to wear the accessory. If the decoration will complement summer looks, it is better to choose tulle, stretch, organza. If the headband is a winter accessory, you should choose wool or velvet for wearing the accessory in the building. It is important to remember that such decoration is not an alternative to a hat, since it does not protect the head from the cold, even if it is made of woolen material. Part of the head in this accessory remains open, and this causes enormous harm to children's health.

It is better to choose cotton headbands for newborn babies, which will not cause allergies in children. may cause irritation. During the hot period, wool and dense materials should be avoided to prevent the child’s head from sweating.

How to make baby headbands with your own hands

How to make a headband with your own hands? To make a beautiful headband for your baby, you need to use high-quality fabric and unusual jewelry. This master class uses lace braid, which will become a wonderful basis for a future accessory.

Materials:

lace braid;
measuring tape;
scissors;
threads in the color of the braid;
needle;
cotton fabric for decoration;
large beads or rhinestones for decoration.

Let's proceed to the step-by-step manufacturing instructions beautiful ribbon for hair. To make a bandage with your own hands, you need:

Measure the circumference of the child's head.
The length of the bandage should match the circumference of the head in centimeters. If the strip of braid is longer, the bandage will fall off. If the tape is shorter, then the accessory will press. Cut the lace to fit the circumference of the baby's head.
Using thread and needle connect the two ends of the tape. You need to sew the tape carefully. This can be done with hot glue, but then the decoration will not be as durable.
For three colors, cut from cotton fabric three stripes 30 cm long and 8 cm wide.
The bottom of the strip process with large stitches. Stitch carefully. Assemble the workpiece into an accordion on a thread, slowly pulling it out.
Close the strip of fabric into a circle and tie a knot. To make the circle look neat, tie a thread on the back of the product.
Glue beads or rhinestones representing stamens onto the finished flower.
Sew onto the lace braid with threads or glue with hot glue. The decoration is ready.

How to make flowers for a headband

The head decoration looks especially delicate with flowers. They can be made from different materials, but the easiest option is to use fabric.

Materials:

soft fabric;
hot glue;
scissors;
felt.

To make beautiful flower for the bandage, you need:

Cut from soft fabric 30 circles with a diameter of 5 cm. Such flowers will be lush and beautiful.
Cut a circle with a diameter of 5 cm from felt. This is the basis of the future flower.
Finish the edges of the fabric as necessary. If there are no threads sticking out of the fabric, then you can skip this step.
Grab one of the fabric circles in the middle so that it gathers into a kind of bag. The bag may have a lot of folds, but this is normal. Glue the bag onto the felt base with hot glue.
Fold the fabric circles into a bag and glue them onto a felt base, and then place them on top of each other. In the process, they can be fluffed to make the flower lush and beautiful.

A headband is a wonderful accessory for a little girl. It will complement any outfit and will be a beautiful addition to the image.

African Queen
Headband with ethnic pattern and large bow.

Printed fabric 55 x 60 cm (we used an old blouse); elastic tape 0.60 m wide 2 cm; interlining G 785; sewing threads.

Cut:
Measure head circumference ().
- bandage 32 cm wide and length equal to head circumference plus 3 cm;
- belt loop 11 cm long and 9 cm wide;
- 2 stripes for bows, 16 cm wide and 24 cm and 28 cm long.
Duplicate the stripes for the bow and the belt loop with a spacer.

Job description:
To sew a bandage - see the instructions for the “Indian Princess” model on the next page, but do not sew up the open area in the seam. Fold the bandage so that the longitudinal seam runs along the middle line of the inside of the bandage. Thread an elastic tape with a length equal to the circumference of the head minus 1 cm into the bandage, and sew the ends of the tape. Sew up the open seam. Sew a short seam using an elastic band. Gather the bandage slightly along this seam. Iron on the belt loop wrong side the ends are 1 cm wide. Fold the strips for the bow and the belt loop in half lengthwise with the right sides facing inward and stitch the longitudinal sections at a distance of 1 cm. Turn them inside out. Iron. Wrap the belt loop around the headband over the gathered seam, and sew the ends of the belt loop on the inside of the headband. Fold each strip for the bow crosswise in half, fold the ends and stitch. Place the ends of the strips for the bow on top of each other diagonally and sew them by hand to inside bandage above the belt loop.

hippie star
The wire helps the bandage maintain its shape.

Printed silk fabric 15 x 80 cm (or an old scarf); silver wire 75 cm thick 1 mm; wire cutters; round nose pliers; sewing threads.

Job description:
Fold the strip in half lengthwise with the right side facing inward and bevel the ends. Stitch the edges at a distance of 1.5 cm, leaving an open section of approx. length in the middle of the longitudinal seam. 5 cm for turning inside out. Turn out the bandage. Use pliers to make a small loop at the ends of the wire. Place the wire into the bandage, insert the ends of the wire into the sharp corners of the bandage and sew with several hand stitches. Sew up the open seam. Place the bandage on your head and twist the ends together.

Indian princess
Turban made of satin and jersey, decorated with Swarovski crystals

You will need:
2 hand-sewn bandeaus,
measuring tape (),
sewing threads (Coats),
Swarovski thermal rhinestones,
scissors (),
tailor's pins (),
styrofoam mannequin.

STEP 1
Lay both bandeaus flat on the table and thread the satin bandeau into the knitted bandeau.

STEP 2
Pull out the knit bandeau so that both bands are joined together.

STEP 3
Place the turban headband on the mannequin, secure the joints of both bandeaus with hand stitches and iron with Swarovski thermal rhinestones.

INSTRUCTIONS

Elastic satin and knitted fabric with elastane, 30 x 65 cm; sewing threads; Styrofoam mannequin (or ball); Denim Blue (Swarovski) rhinestones: 6 rhinestones with a diameter of 5 mm, 3 rhinestones with a diameter of 10 mm and 4 rhinestones with a diameter of 12 mm.

Job description:
Bando. Fold the satin/knitted fabric in half lengthwise with the right side facing inward and sew 65 cm long sections at a distance of 1 cm. Press the seam allowances. Pull one end through the bandeau to the other end. Stitch the edges at a distance of 1 cm, right side to right side, leaving the seam section open for turning. Turn out. Sew up the open seam.

Assembly. Cm. step by step instructions higher. In this case, the transverse seams are located at the back, and the longitudinal seams are on the inside.

Photo: Jan Schmiedel (7), Catwalkpix.com (2). design: Teresa Bachler

Today I will show you how to sew a headband in 30 minutes. After sewing it, I realized how comfortable and practical this headdress is. How did I ever manage without her? After all, it is suitable not only for summer, but also for warm autumn, when it is still hot in a hat and it is desirable to cover your ears. I’m also terribly lazy in terms of figuring out how to beautifully tie a scarf on my head, but with this headband I don’t need to waste time, everything has already been thought of and I just put it on my head and voila, an instant beauty)!

To sew a headband, you don’t have to buy fabric; look in your closets, you might have scraps of fabric lying around. For example, I took mine neckerchief, which I don’t wear, but now it has found its use.

What did I need to sew a headband?

cotton or viscose fabric - 30 cm.
elastic band wide 3 cm - 14.5 cm.
thread in color 1 spool
sewing tools - scissors, measuring tape, safety pin

How to sew a headband step by step

The headband consists of three parts - these are two upper parts that cross each other and a lower part with an elastic band.

1. I cut out the upper parts of the bandage - two rectangles with sides 27*50 cm.

2. I fold the parts in half one by one and sew them together using a sewing machine.

3. I iron it at a low temperature so that the seam is in the middle of the parts.

4. I cut out the bottom part of the bandage for the elastic band.

5. I sew the bottom piece along the side seam, retreating from the edge by the width of the foot. To turn the part out, I attach a safety pin to one edge and draw it along the entire length from the inside to the other end. I iron it.

6. I push the elastic band inside using the same pin.

7. I fix the elastic band inside. To do this, I sew it on a sewing machine to the fabric on both sides.

This is what should happen in the end. Using an elastic band, the headband will fit any head circumference.

8. I tie the upper parts of the bandage together as shown in the photo.

9. I place counter folds at the ends of the upper parts of the bandage.

So that the width of the upper parts with folded folds is equal to the width of the lower part with elastic.

10. I place the piece with the elastic on one of the top pieces of the bandage, so that the seam on the top piece is at the bottom. I sew them together.

Then I do the same with the second top piece.