DIY beach bag photo. Do-it-yourself large beach bag from old jeans Sew a transformable beach bag with your own hands

You can sew not only clothes, but also accessories yourself. A hand-sewn beach bag will exactly match the preferences and style of the owner and will delight you with its original design and pleasant colors. You can create a unique copy that differs from standard products. Even novice craftsmen can make this accessory. If desired, you can use decorative fabrics so that the product can be worn not only for relaxing by the water, but also during evening walks.

Durable and wear-resistant materials are best suited for a beach bag:

  • jute and burlap, thick “matting”;
  • durable cotton canvas and linen;
  • classic denim;
  • nylon, vinyl, other synthetic fabrics.

Sewing a beach bag with your own hands is actually not difficult. But you need to be aware of several important conditions.

  • Do not skimp on fabric - the product must be roomy, because beach accessories are voluminous.
  • Sew several pockets of different sizes and think about their location so that the product is convenient to use.
  • Choose fabrics with a dense texture that do not allow grains of sand to pass through and that repel water—preferably, they are machine washable.
  • If the material is thin, you can reinforce the product with a lining made of padding polyester or similar material.
  • Think decor - ruffles and cotton lace, appliqués, beaded or faux leather handles.

babyben.ru

Beach bags can be designed without a pattern. The drawing helps to make the process more clear and avoid mistakes when working. For a traditional square or rectangular model, you will need parts for the front and back (or one with a fold), as well as separate elements for the handles and bottom. When transferring parts to fabric, allow seam allowances of 1.5 centimeters. You can immediately draw out the details of the sides on the pattern, adding 5-10 cm to the sides, then they will not need to be additionally cut out and sewn.

How to sew a classic beach bag

To make a classic square model with two handles, you need about 1 meter of main material plus the same amount for the lining. You will also need 3-4 m of adhesive material and thread (you can use contrasting ones for stitching). Before sewing a beach bag, you need to look at how the designs and patterns are located on the main fabric in order to combine them or, if the image is large, place them in the center of the sides. A piece of fabric is folded in half, two elements measuring about 50x55 cm and two more - 5x55 are cut off. For the lining you will need three pairs of parts - 50-55 cm, 25-55 cm and 5x55 cm. Each element is strengthened with adhesive.

Progress

  1. Place the front side of the product (made of the main fabric) face up and apply the lining with the wrong side up, retreating to the bottom 20-22 cm and pinning the parts with pins.
  2. Repeat the same procedure on the back side.
  3. Sew the parts on the machine, leaving about 1 centimeter from the edges.
  4. Iron the seams on the right side.
  5. Make decorative contrast stitching along the front side of the parts - at a distance of half a foot from the main seam.

you-freetime.ru

For the second half of the product, the sequence of actions is similar. Next, the two resulting elements are pinned together with their faces on the inside and carefully stitched on the sides and bottom at a distance of about 1 centimeter from the edge. The lining parts are also fixed with their front sides facing each other and stitched. The seams need to be ironed both from the face and from the back.

Progress

  1. Turn the fabric out from the corner along the outer part of the product - the side and bottom seams should overlap each other.
  2. Fasten the seams with a pin, draw a line perpendicular to them and emanating from the top - the longer it is, the more voluminous the bag will be.
  3. Make a stitch along the line, securing at both ends.
  4. Sew the lining in the same way - you need to retreat from the top not 4, but 8 cm.
  5. Cut the corners of the main and lining fabrics, leaving 1 centimeter from the seams.

To make a handle (you will need two of them), you need to combine one part from the lining material and one from the main one. They need to be fastened together, stitched along two long sides and one of the short ones (about 7 mm away from the edge). Then the fabric is turned inside out and ironed. You can lay a contrasting decorative stitch along the front side - it is sewn 5 mm from the edges. The lining fabric of the bag is turned right side inward and handles are inserted into it - the ends should be 15 cm from the sides, and 13-15 cm should be left between the inner ends of the parts.

you-freetime.ru

The fastened main part of the product is placed inside the lining - so that the upper edges are connected evenly. They are first fastened with pins and then sewn along the entire top with an allowance of 1 centimeter. For additional strength, a few more lines are made in the most “vulnerable” places. All that remains is to turn the product inside out through the hole left in the lining and close it. You can also add decorative stitching along the top.

How to sew a bag-mat

“Transformers”, which fold out of the bag into a beach mat, are very convenient. Even if you have little tailoring skills, you can sew it without difficulty.

Necessary materials

  • Main fabric for the top.
  • Waterproof backing.
  • Foam rubber is a layer for softness.
  • Braid for handles, Velcro for fastening, decor.

The pattern consists of two rectangles of the selected size. You can focus on the “dimensions” of your favorite beach towel.

Progress

  1. Cut out the fabric parts, leaving seam allowances.
  2. Cut out the foam inserts - with the same dimensions, but without allowances.
  3. Place the fabric wrong side up, sew along three sides and finish the seams.
  4. Turn the fabric face out, insert foam rubber and make horizontal stitches along it in increments of 15 cm so that the “cushion” does not move out.
  5. Sew open edge.
  6. Attach handles and Velcro.

babyben.ru

Economical denim model

Old jeans are often used to sew beach accessories - this allows you to get a beautiful bag at no extra cost. Denim is a dense fabric that will withstand contact with both water and sand and will serve for a long time. You will also need a light lining material, and, if necessary, padding polyester to add rigidity, as well as a lock (zipper or Velcro). You can use eyelets and stripes as decoration.

Having chosen the pattern you like, transfer the details to the material, leaving standard allowances. The elements are folded face inward, the sides are sewn to the bottom, leaving one side unfastened. You can make darts - the fabric is pinched perpendicular to the seams and stitched using a machine.

Progress

  1. Attach the padding polyester from the wrong side.
  2. Sew the lining.
  3. Turn the accessory face up, attach separately cut pockets, appliqués, and ruffles to it (it can be sewn to the top edge).
  4. Insert a zipper or sew on Velcro.
  5. Connect the lining and the main part of the product.
  6. Attach handles with inside- they can also be woven from denim (in the form of a twisted cord).

To make denim bags, fabric is often taken from the trouser legs, and the handle is made from the belt. All that remains is to decorate the product with eyelets or other decor - and the beach accessory is ready.

Every modern fashionista is preparing for the beach season. It is important to think through the whole image, not forgetting about the little things. To have a place to put all the necessary items, you need a spacious bag. You can buy it in a boutique, but it’s better to make it yourself, then the accessory will be unique in its kind. How to make a beach bag with your own hands and is it so difficult?

It can be sewn from textiles, knitted from yarn and even woven. However, not everyone is good at crocheting and knitting, but sewing a beach bag, following the instructions of skilled craftswomen, is within the power of every woman who has a sewing machine.

What fabric should it be made from?

Today, the choice of material for a bag is so diverse that it will satisfy the most demanding preferences:

  • When choosing textiles for a beach model, it is better to give preference to environmentally friendly materials. It is important that the textile is dense, quick-drying, sand-resistant and moisture-retaining. This way it will keep its shape.
  • Let leather accessories wait for another occasion: here you need lightness and absolute ease
  • Ideally, the best textile is one with a rough texture, but you can use linen, denim, and calico.

In addition, it is good if the finished product can be machine washed.

Sewing features

Beach bag– the easiest accessory to make. It won’t take much time to create it, and the result will delight you with its beauty. Despite the apparent complexity of execution, when sewing a product, temporary hand stitches are not needed, and fitting at intermediate stages is excluded.

If you are not sure about proper creation patterns, you can use a ready-made one: this will reduce the time for sewing and increase the accuracy of the cutting details.

To make a bag look like it came from a boutique, every step must be executed flawlessly. When working, it is necessary to use sewing pins, matching the seams, eliminating fabric overflow. You should not expect that all defects can be straightened out with an iron: this is not the case.

All excess needs to be trimmed off.

If the fabric is new, before starting work it is better to iron it (iron the material with steam) to prevent shrinkage in the future.

To prevent the product from becoming deformed after washing, when cutting it is important to observe the longitudinal and transverse sides: new fabric almost always shrinks in length. It is not difficult to correctly determine the direction: the textiles stretch somewhat in width.

You should not create a frame from cardboard: the beach bag may get wet, which will lead to the paper becoming soggy. It is better to reinforce the bottom with a double layer of fabric.

Patterns

In cases where an interesting style is conceived, it is better to use ready-made pattern. This will make it easier to calculate material consumption and make the work more accurate. Any pattern depends on the design idea.

It can be simple, or model, with a lot of decorative details.

Depending on the chosen option, it differs in shape (in the form of a rectangle, semicircle, trapezoid, square, with a ring, in boho style, in the form of a T-shirt, a sack bag).

In addition, models can be flat or voluminous, hard or soft.

When choosing a pattern, you need to consider textiles: soft fabric does not hold its shape, even if it is backed up with glue.

The shape of the accessories is very diverse, and thanks to the professional approach of the needlewomen, the collection of patterns is constantly updated. However, it is not at all necessary to use ready-made template: You can come up with your own design by making some adjustments to the approximate sketch.

How to sew for the beach?

Choosing fashionable style, you need to take into account a number of nuances. A beach bag can be an independent accessory or perform several functions at once. In the first case, it will contain all the necessary accessories, in the second it will become an accessory over the shoulder, freeing up your hands when walking to the beach.

These styles are comfortable to wear.

When folded, it will look neat and take up less space than a rug in a bag. The tailoring of the model depends on the intended functionality.

How to decorate?

The design of a beach bag is carried out taking into account the chosen style and taste of the woman. Depending on the type of material and color, sometimes a minimum of decor is needed. For example, if the model is monochromatic and sewn very simply, you can decorate it with an interesting pattern using special paints.

So it will look fashionable and bright.

There are no restrictions in choosing a topic. It can be a simple classic (stripe, check) or an abstract, geometric motif, floral and urban sketches. It all depends on creativity author.

If you don’t like designs on fabric, you can decorate the product during the sewing process with appliqué, embroidery or a combination of several decorative elements. Compositions with flowers and marine paraphernalia will look beautiful. They look interesting and crocheted blanks that are sewn to the front of the bag. In this case, it is important to choose the right material and finish so that they match each other.

Ideas for creating

If you don’t want to buy fabric, you can use forgotten things that you will probably find in your wardrobe. Old jeans - why not? Sometimes it is enough to cut the trouser legs, sew up the bottom, add handles - and the bag is ready.

For a creative look, you can bring to life an option a la Dolce and Gabbana: a transparent, roomy bag made in a minimalist style and decorated with a modest decorative braid and reliable handles.

A little similar, but in a sporty vein: a bag made of colored mesh, decorated with durable braid and complemented by a pocket. An excellent “breathable” accessory, in which the towel will dry faster, and everything is always in sight.

Craftswomen will always have scraps and leftover material that can be put to use by choosing colors to match the pattern of the swimsuit. This can make a real beach ensemble.

For those for whom a combination of two shades is not enough, this will suit patchwork technique. Patchwork is exciting and bright. Many women will like this bag; it is always unique and original.

Creative fashionistas will love the idea of ​​tailoring fashionable bags from a printed T-shirt: fast and original.

For greater effect, you can cut the bottom of the product into a fringe, tying it in knots. However, there is a nuance here: the bag needs a model made of thick knitwear, otherwise the accessory will not look beautiful.

Got a doormat and thick, rough cord? Just two seams, and the product will look just super! Flat model, quite roomy and comfortable. This bag will fit all the necessary beach accessories.

If you have an old skirt with frills in your wardrobe, even more interesting: by connecting the bottom of the penultimate frill and sewing on the handles, you will get a delicate model that will definitely appeal to romantic people.

A universal option is a model made from a bath towel. Why not? It’s stylish and will always come in handy if you need to dry yourself off after swimming in the sea.

Master Class

Sewing a beach bag yourself is not as difficult as it seems at first glance. To make the accessory, you will need a top material measuring 1.10 m long and 1.35 m wide and the same amount of finishing (made of natural fabric). Textiles that are too thin and soft do not hold their shape; it is better to use coarse material. The glue will take at least 4 meters, since almost all the parts will have to be glued. Threads are needed in tone (for sewing) and contrast (for stitching).

For this sewing, you do not need a pattern: you can fold the fabric in half widthwise and trim the edges to symmetry: when folded, you get a square with a side of 55 cm. Mark 5 cm from the length and cut off the resulting strip. Then each part is cut along the fold: two parts are obtained 0.5 m (height) x 0.55 m (width future bag) and 5 cm x 55 cm.

The trim is cut out according to the same principle, but in addition to two large and two small parts, two more blanks measuring 25 x 55 cm are cut out (this will be the decor of the sides).

The adhesive is cut separately for each part with the exception of decorative parts, otherwise the thickness of the textile will be uneven. It should yield 4 pieces 50 x 55 cm and four 5 x 55 cm.

After all the blanks are cut out, non-woven fabric (adhesive) is glued to them from the wrong side. If there is excess, the adhesive is trimmed.

A decorative insert of finishing measuring 25 x 55 cm is applied to the base part at a distance of 22 cm from the bottom with the wrong side and adjusted at a distance of 1 cm from the edge. Then the trim is folded over the face, ironed and a finishing stitch is applied with contrasting threads. If the design includes double finishing lines, it is advisable to follow this technique throughout the entire finish.

The work must be done carefully so that the overall appearance is not damaged. Having sewn on the finishing parts, they are checked for symmetry, after which they are folded with the right sides inward, pinned on the sides and bottom, and stitched on a sewing machine. The seam width is 0.8 - 1 cm. You can use the presser foot as a guide. For greater reliability, the seam is made double.

When preparing for a summer vacation, you can go to the shopping center closest to your home and spend the whole day looking for a great beach bag that would be roomy enough, have strong and reliable handles, and would ideally match the color of your swimsuit and your entire summer look in general... And you still can’t find it... Or you can become a designer for a while, try to bring your creative ideas to life and sew a beautiful and unique bag with your own hands! It's not as difficult as it might seem at first glance. A little imagination and artistic imagination, and now you are the proud owner of a beautiful thing in a single copy. Moreover, this is a rather multifunctional thing: it can also be used as a shopping bag for going to the store or for walking around the city; it will not take up much space in a suitcase and will be quite universal in life. And having decorated satin ribbons, rhinestones, beads or diamond embroidery (more details about such embroidery can be found here: http://hobbion.ru), such a bag can be used for beach parties and romantic walks.

Types of beach bags: shape, material, color

The choice of beach bags is wide and varied - in shape, color, fabric used, decorations, etc.

Form

  • On the beach, the most comfortable bags are those shaped like a square or rectangle. Very practical models that have internal or external zippered pockets for storage various kinds little things.
  • Some people like classic tote bags - these are soft bags with straps, like a backpack, the top of which is gathered with a drawstring.
  • Transformable bags are very convenient on the beach. These are essentially rugs or blankets that, if necessary, can be rolled up and fastened with buttons or snaps sewn around the perimeter.
  • When sewing, you can experiment with models of handles or straps: tailor shops sell interesting wooden, wicker or plastic varieties. Just make sure that they are wide enough and do not cause discomfort when worn.



Material

Nowadays there is a large selection of materials, so you will not have problems choosing fabric for sewing a beach bag, everything is limited only by your desires. An ideal beach bag should be: durable, wear-resistant, roomy, but light, because you need to pack so many useful things into it; waterproof to keep things dry; in form - laconic, the simpler the better, but have a couple of pockets for convenience; and, of course, stylish and beautiful! Any type of raincoat or mixed fabric, canvas, jeans, etc. are suitable. Bags made from oilcloth or modern PVC materials are always noticeable on the beach. They are very attractive, but at the same time practical. You can use so-called eco-friendly materials: burlap, canvas, linen or even straw. You don’t even have to spend money on a purchase new fabric for sewing, you probably have a couple of unnecessary things that are already out of fashion somewhere on a distant shelf at home - this is also a great alternative!


Color

As for the color of the beach bag, it is better if it is brightly colored: exotic animal or floral prints, ethnic patterns in expressive colors are quite appropriate. The nautical theme will never go out of fashion: blue and white stripes, anchors, boats, rope-shaped strands, etc. - as always, this is a win-win beach option.

How to make a simple fabric beach bag

If you are not yet very experienced needlewoman, then it’s better to start by sewing the simplest model of a rectangular beach bag. To do this you will need:

  • facial tissue;
  • lining fabric;
  • synthetic padding to give a rigid shape to the bag;
  • grosgrain ribbon;
  • threads;
  • scissors;
  • sewing machine.

This is easy to do if you follow the following instructions:

  1. Cut out two rectangles measuring 40 cm by 60 cm from the front, lining and padding polyester fabrics - these will be the sides;
  2. Cut out one rectangle measuring 15 cm by 45 cm from the front, lining fabrics and padding polyester for the bottom of the bag;
  3. To make handles for a future bag, you need to cut 2 pieces of grosgrain ribbon about 80 cm long and stitch them to facial details bags;
  4. Next, you should manually baste parts made of padding polyester to similar parts made of face fabric;
  5. Sew two rectangles of face fabric along the short sides and sew the resulting blank to the bottom of the bag;
  6. Repeat step 5 for lining fabric;
  7. Turn the front piece inside out, put it in the back side and sew them along the top edge, leaving about 10 cm;
  8. Turn the bag right side out through the hole left, and then carefully sew it up by hand;
  9. Stitch along the edge of the entrance to the bag twice, retreating by 2mm and 7mm.
  10. Mark the locations of the handles and sew them according to the markings.

Your new beach bag is ready, decorate it as you wish and wear it with pleasure!



How to sew a beach bag-mat

This bag is sewn simply and quickly, very comfortable and practical, it serves as both a bag and a beach carpet.


The pattern is a rectangle. From the main, lining fabric, as well as thin padding polyester or foam rubber, 3 rectangles are cut out, 90-150 cm long and 50-70 cm wide (dimensions may be different). The rectangles are sewn together along the edge or edged with bias tape. If necessary, the folds of the bag are sewn off. Then handles, pockets, and ties are sewn on the sides. Instead of ties, you can use buttons or a zipper. The simplest bag-mat is ready.


How to make a beach bag from jeans

Now that you already know how to sew a simple basic model beach bag, you can get a little creative. If you make a bag from old jeans, you can emphasize your individuality and create a truly signature piece of clothing. Denim is now quite a trendy material, so your bag will certainly turn out stylish and modern. Spend some free time and turn unnecessary thing V fashion accessory which will help highlight your style.

You can get creative and combine several pairs of jeans in one bag. different color- sew individual flaps in a random order or create a complex pattern, and then tightly cut out individual parts of the bag from this. Or simply rip apart the legs and use them as a finished piece of fabric. If you take a closer look at the model of denim trousers, then perhaps they are already decorated with ready-made interesting design elements (pockets, belt, patches, stripes, etc.), with which you can later decorate your product.

Here are a few more types beach bags, which are easy to sew with your own hands using simple patterns (you will find even more ideas in our section):





In any case, no matter what kind of beach bag you get, remember that no one has a second one, especially since “hand made” items are especially popular now. Spend some time in creative leisure and create a unique thing. May your upcoming holiday this year be special, magical and unique. Have a nice holiday and a safe journey!

Summer is in full swing and I want it so bad successfully update your wardrobe by adding original accessories that will attract attention and be useful every day. DIY bags are what you need if you want your accessory to be not only beautiful, convenient and functional, but also one of a kind!

Today we will learn how to make simple bags with our own hands at home. For work you may need special tools, like sewing machine, old or new fabrics, small sewing accessories and, of course, imagination!

How to sew a shopping bag with your own hands

The simplest shopping bag, which will be an excellent alternative to disposable plastic bags, can be easily sewn from an old piece of material. To do this, you don’t need to have the talents of a seamstress at all, but just know how to operate a sewing machine.

To work you will need:

- 2 rectangular pieces of colored fabric of desired sizes

Ready-made dense tape of fabric about 1 meter long and 2 centimeters wide

Sewing machine

- Scissors

Let's get started:

1) Using a zigzag stitch, work around the top edge of the fabric and sew on the right side tape edge as shown in the photo.


2) Then bend the edge inward about 2 centimeters and stitch it two lines, while grabbing the tape.


3) Don't forget to attach second part of the tape so that it turns out to be a handle.


4) Do the same with the second piece of matter. You did it two halves future bag.


5) Place both halves together with right sides facing in and stitch around the edges zigzag or regular stitch.


6) Turn the bag inside out.

DIY summer bag made from T-shirts

A great idea is to use old unwanted items for something useful. If you have some lying around old T-shirts, which you haven’t worn for a long time, and you don’t want to waste them on rags, try turning them into light summer bags.

To work you will need:

- Old T-shirt

Pins

Sewing machine

- Scissors

Let's get started:

1) Cut off everything from the T-shirt unnecessary tags and labels.


2) Turn it inside out and fold across as shown in the photo.


3) Fold the bottom edges up and pin them in place. These will be internal pockets future bag.


4) Sew the bottom edge on the machine, and also make middle vertical seam on both sides so that there are 2 pockets on each side.


5) Turn the bag right side out.

DIY fabric bag (video)

DIY clutch bag

An interesting idea for making a bag from cardboard tea box. It would seem: how else can you use the box after the tea is over? It turns out that it makes a very stylish and unusual clutch for small items, like cosmetics or keys.

To work you will need:

- 2 identical tea boxes or any other rectangular boxes

A piece of satin fabric

1 large bead

Thick chain with fastenings

- Scissors

Let's get started:

1) Take one of the boxes, open it completely and cut off the edges, as shown in the photo, to create a pattern consisting of five parts: three rectangles (one under the other) and two small rectangles on the sides. This will be the inside of the future clutch - its lining. The edges should be trimmed to fit the lining into the main box. On the sides, you should cut off a small rectangle at the side parts of the pattern to make it more convenient to attach the chain.

2) Attach the pattern to the fabric and cut the material along the contours, leaving approximately 1 centimeter each from each side.

3) Cut out the blank for the future lining. Make cuts in the corners.

4) Attach the fabric to the cardboard and glue the edges using glue.


5) Insert the lining inside the whole box.

6) Place the lining on the glue.

7) Before gluing the lining, glue the elastic at the top of the box. lace loop, with which the clutch will be closed.


8) Use glue to decorate the box rhinestones.


9) Attach the chain to both sides of the box, after making holes using an awl or other sharp object. It's better to choose chains with fastenings on the sides, which are specifically designed for such products.


10) On the front side, sew or glue a bead that will serve decoration and at the same time clutch clasp. The clutch from the box is ready!

Updated DIY leather bag

Each of us most likely has some kind of old leather bag, which you no longer want to wear, but it’s a pity to throw it away. To solve the problem, you can update your old bag, repainting it in new unexpected colors. Use the advice of this master class to get a new original item.

To work you will need:

- Old leather bag

Paper tape

Acrylic paints

Brush

Ruler and pen

- Leather polish

Let's get started:

1) Make sure the surface of your bag is clean and dry. Use a ruler to measure at the top edge of the bag. 2 centimeters each, making marks with a pen. You can make the strips any other width you want. It is necessary to measure equal segments with a ruler so that future strips will turn out equal and even.


2) Apply strips of adhesive tape, guided by the marks. You can also put tape on the inside to the paint accidentally got into the wrong place.


3) Leaving the strip uncovered, paint it using white paint. It is better to apply several layers of paint to make sure there are no streaks. Let the paint dry thoroughly.


4) Make as many stripes as possible at regular intervals to create a striped pattern. You should be careful not to stick the tape in a place where the paint has not yet dried, otherwise you can ruin the strip.


5) After all the strips are dry, paint the handles with white paint.


6) After drying, apply on top green paint. White background important so as not to lose color. It is better to do several layers so that the paint adheres well and there are no streaks.


7) After all layers of paint are dry, apply to the bag special varnish for leather to give it a finished look.


8) Beautiful new and very stylish striped leather bag ready!

How to decorate a bag with your own hands

Decorating your bags with your own hands to update them and make them more attractive is a great idea for the summer season. One of the options for decorating a rag handbag is to use a variety of felt flowers, which will make any handbag bright and very noticeable.

To work you will need:

- Cloth bag

Multicolored felt pieces

Paper and pencil

- Scissors

Let's get started:

1) Draw on a piece of paper flower of desired shape depending on the size of your bag. It is better if the flowers are small - about 5 centimeters in diameter, then the decoration will look much better. Cut out the pattern, apply it to felt and trace the flower with a pencil.


2) Cut many flowers from sheets of felt of different colors.


3) Place some glue in the center of the flower and glue two flowers together to make the flowers look more magnificent.


4) Start gluing pairs of flowers to the surface of the bag. Can also be used for this purpose needle and thread, to sew flowers to the fabric, then there is less chance that they will fall off over time.


Bag decorated a piece of fur from an old collar, looks very rich and expensive. See for yourself:


When cutting fur, you should be extremely careful and use a knife rather than scissors so as not to damage the hairs.


From very small scraps of fur you can make something like this decorations for bags in the form of fluffy balls:


Another option for decorating a bag is to use an ordinary bright scarf, which can be tied on the handle in different ways:


Looks good as decoration fabric flowers:


Another popular option for decorating bags is laying out beads:

DIY string bag

You probably remember the original Soviet-era string bags, in which they carried food. We invite you to make a not quite familiar, but very comfortable and original shopping bag that will look very stylish. This handbag is very easy to sew from old T-shirt.

To work you will need:

- An old T-shirt made of stretch fabric

Sewing machine

Ruler and pencil

- Scissors

Let's get started:

1) Cut from an old stretch T-shirt semicircular top. To ensure that both sides are the same, fold the T-shirt in half and mark the cut line with a pencil, as shown in the photo.


2) You can make several blanks from different T-shirts.


3) From the wrong side, sew the edge on a machine, this will be the bottom of the future string bag.


4) Finish the wrong edge zigzag seam so that the fabric does not fray during use.


5) Using a ruler and pencil, draw straight rows of broken lines on one side, as well as a large line in the center at the top - these will be the handles.


6) Using scissors, make cuts along drawn lines, capturing the other side as well. Be careful with the edges to avoid damaging the seam.


7) The original string bag with slots is ready!

DIY beach bag

Very popular bags for going to the beach or pool, which you can make with your own hands. We would like to offer you a very interesting option for sewing a beach bag, which is essentially not only an accessory in which you can carry everything you need for a vacation, but also bedding with pillow. You can sew such an original beach bag from two towels.

To work you will need:

- Two medium sized bath towels

A small pillow, slightly smaller than a towel

Pieces of cotton fabric

Pins

Buttons and loops

Sewing machine

- Scissors

Let's get started:

1) Prepare a small rectangular pillow, which would be slightly narrower than a towel.


2) Place the pillow on a towel and fold it together with the edge forward so that it forms a pocket for a pillow. Pin the edges and stitch them. Leave a little extra space at the bottom in order to sew on a second towel; cut off any excess.


3) The second towel must be trimmed on the sides long strip color cotton fabric . To do this, you need to cut a rectangle from the fabric with a length equal to the length of the towel and a width of about 10 centimeters. You can sew several scraps of material, or you can use the same fabric.


4) Fold the edges of the strip to the width 1 centimeter and go over the workpiece with an iron.


5) Sew the trim to the edge of the towel using a sewing machine. Then sew both pieces together - pillow and towel. When folded, the product will look like this:


6) It remains to add important details. Prepare two square pieces of cotton fabric to make front and back pocket. Pin the pocket in place using pins and then stitch along three sides, leaving one side untouched. The edge of this side should be machined in advance to prevent the fabric from fraying.


7) From the remaining piece of the first towel, sew two wide handles. To do this, cut two wide strips of the desired width, taking into account that you will fold them in half. Fold the edges and stitch along the entire length.


8) Pin the handles to the bag in the right places with pins, check that Are you satisfied with their location?, then unfold the product and sew on the handles using a sewing machine.


9) Sew two bright buttons in the place where the bag will close.


10) Sew matching buttons on the lid loops.


11) Beach bag-mat is ready!

DIY small bag from a book

Do you want to recycle old books? Don't rush! You can use their hard covers to make original small handbags with handles or handmade clutches.

To work you will need:

- Old book

Lining fabric

Bamboo handles (optional)

Paper and pencil

With the onset of the beach season, many fashionistas have the question of purchasing a beach bag. Of course, you can always buy it, but a hand-sewn product will look much more interesting. The most inexperienced needlewomen can cope with this task. Step by step instructions how to sew a beach bag with your own hands, patterns for work and useful tips for implementation interesting ideas you will find in this article.

Method 1

The details for such an accessory can be immediately cut out on the desired fabric, drawing elements of the required sizes on it with chalk. However, the most proven method is to use patterns on paper, because they are not only convenient, but also reusable.

The parts must have the following dimensions:

  • The parts of the bag that are located at the front and back are 36*40 cm.
  • If there is only one part, then together with the fold the dimensions will be 72*40, where 72 is the length and 40 is the width.
  • The bottom has the shape of a rectangle 36*9 cm.
  • The handles of the product are 100*2 cm - you can adjust this parameter.

Important! When cutting out parts, do not forget to leave seam allowances. They should be approximately 1-2 cm wide. Also, do not forget that all parts, with the exception of the handles, must be cut out the same (the lining fabric is no exception).

Bag base

In order to sew a beach bag with your own hands using a pattern, you need to follow this procedure:

  • Duplicate the front, back and bottom parts of the bag with padding polyester. To do this, you need to pin the cut part to a piece of padding polyester and sew them together.

Important! Do not forget that you need to cut off the allowances made on the fabric from the padding polyester. You don't need extra thickness of the product.

  • Sew the back and front sides of the product together.
  • Iron the resulting seams.
  • On the narrow side of the bottom rectangle, mark the middle, then combine it with the side seam of the product. Do the same on the other side of the rectangular piece.
  • Sew the parts, cut off the excess padding polyester lining.
  • Press the resulting seams.
  • Turn the product inside out. You will end up with a bag that resembles a rectangle.
  • Sew the same bag from lining fabric.

Internal pockets

To make pockets you need to do the following:

  • Cut pockets of the required size from the lining fabric.
  • Finish the edges of future pockets to prevent the fabric from fraying.
  • Beach bags often have one zippered pocket. If desired, baste such a fastener to one of the prepared pockets.
  • Select the locations of the pockets and sew on the details.

Important! At your discretion, you can sew a wide elastic band, which, in turn, will serve as a holder for water, glasses or combs.

  • Turn out the inner “bag” and iron it.

Pens

To finish sewing a beach bag with your own hands according to the pattern, you need to make the handles of the product. It's very easy to do this:

  1. Cut a strip of fabric to the desired length.
  2. Iron the seam allowance to the inside.
  3. Pin together with safety pins.
  4. Tack.
  5. Close the allowances by sewing a grosgrain ribbon onto them for this purpose. The handles are made.

Final stage

So, the main parts have been made, now we need to move on to the final stitching of the future accessory. To do this, you need to follow a simple algorithm:

  • Place the inside of the bag inside the outside.
  • Pin these two pieces together.
  • Sew them together.
  • Decorate the finished product to your liking.

The bag is ready!

Method 2

A great option is to sew a beach mat bag with your own hands. Such products are very convenient to use, because they simultaneously perform two useful functions. Moreover, even the girl who first picked up a thread and a needle can handle making such an accessory.

For work you will need the following materials:

  • Cotton fabric in the color you like.
  • Water-repellent fabric.
  • Braid, fabric appliqués for decorating the finished product.
  • Foam rubber. It is better to immediately cut 4 pieces measuring 50*39 cm.

Now you can get to work:

  1. Cut rectangles 160*55 cm from the prepared fabrics.
  2. Cut 8 pieces of braid, the thickness of which is 5 cm. They will act as ties for the sides.
  3. Sew these pieces along the long sides of the cotton rectangles.
  4. Proceed to stitching the two parts of the future rug. In this case, only three sides are sewn. One should remain unstitched as foam rubber will be stuffed there.
  5. Lay down the foam.
  6. Stitch up the edge that is left open.
  7. Fold the handles from the braid and sew them to the bag-mat. It is better to use leftover cotton fabric for this.

Method 3

How about sewing a beach bag with your own hands using a pattern using old jeans? This accessory is not only easy to sew, but also quite interesting. Moreover, items of clothing and accessories made from such material are very stylish, which means the owner of the new item will feel very confident.

To work you will need:

  • Jeans.
  • Lining fabric.
  • Decorative elements that can be used to decorate the finished work.

Now you need to cut out the listed parts:

  • The beach accessory will consist of two parts - front and back (their dimensions are the same - 49*40).
  • 90*9 - the size of the bottom of the product and its sides.
  • 85*4 - bag handles.

Important! The length and number of handles can be changed at your discretion. You can make one long handle or two shorter ones. The ideal option is three handles, that is, two short and one long.

  • The 3*60 strip is the part of the product to which the zipper will be sewn.

All that remains is to sew a beach bag with your own hands using a pattern that is already ready. The work algorithm looks like this:

  1. Sew a zipper to the top pieces, then sew them to the back and front pieces.
  2. Fold the fabric for the handles, iron it, and then sew it to the front of the bag.
  3. From the lining fabric, cut out the same parts that were cut from the base fabric (jeans). Sew the lining and the outer part of the product together.
  4. Sew the remaining parts to the workpiece.
  5. Decorate the finished product with prepared decorative elements. You can sew a pocket from old jeans onto the outside of the bag - it will definitely come in handy when using your beach bag in the future.

Video material

A beach bag is one of the most necessary things for a summer vacation on the shore. In order not to buy a finished product in a store, you can sew it yourself - it’s much cheaper and more interesting. Besides, no one else will have a bag like yours. After reading this article, you learned how to make such an accessory correctly.

Latest materials in the section:

IV Federal campaign “Reliable Partner” starts in the regions of Russia
IV Federal campaign “Reliable Partner” starts in the regions of Russia

On July 3, the Federation Council will host an awards ceremony for the winners of the V Federal Action “Reliable Partner.” Members of the Council are invited to participate in the event...

Autumn compositions of vegetables and fruits
Autumn compositions of vegetables and fruits

Autumn gives us a lot of materials for creativity. These include leaves of various colors, chestnuts, dried flowers, acorns, and decorative...

How to crochet a dress, digest
How to crochet a dress, digest

A fabulously beautiful white lace knitted dress with airy openwork patterns will become indispensable on summer days. Size: 38-42 You will need:...