Quilling snowflakes: an elegant DIY decoration. Snowflakes using quilling technique - New Year's paper rolling! Snowflakes from quilling for the New Year scheme

New Year's crafts / Paper crafts

Do-it-yourself voluminous snowflakes using quilling technique!

Snowflakes are the easiest way to decorate your home for the New Year. We have already shown you how to cut. Can be done can be done and even

Today you can learn how to make graceful snowflakes using the quilling technique!

2:9

We will need:

strips of colored paper 5 mm wide different shades blue

(office or special paper for quilling)

toothpick or narrow awl

ruler with holes;

PVA glue.

for the first snowflake

54 strips of dark blue paper

36 strips of light blue paper

for the second snowflake

51 strips of dark blue paper

39 strips of light blue paper.

You can buy ready-made quilling kits, or you can cut them yourself from A4 colored paper, as we did. To make the snowflakes more picturesque, we will use stripes of two colors in each element.

We will fold snowflakes according to the scheme, taking into account that:

3:9

For a free roll and one large thick roll you will need three strips of paper - 2 dark blue and 1 light blue,

For 1 small roll you will need one strip made up of halves of different colors.

So, cut the paper and start rolling the rolls.

Thick rolls will ensure the strength of a snowflake made of paper that seems fragile at first glance. To do this, it is convenient to use a simple toothpick.

It is convenient to adjust the diameter of the rolls using a special ruler by placing the not yet glued roll in the desired cell - in it it will “unwind” to the desired diameter. Rolls can be made loose (free rolls) or dense. We will need both thick rolls.

4:9

Free roll: We wind the strips (pre-glued end-to-end) onto a toothpick, holding them with our fingers on both sides so that our roll turns out even. Then, after obtaining the desired diameter (using a ruler), carefully glue the edge.

Tight roll glue it without unraveling.

For making rhombuses from free rolls, we first squeeze them on both sides, as shown in the photo on the left, and then do the same operation, forming the other two corners - this action will give the roll a diamond shape.

We arm ourselves with glue and begin to glue the elements, starting from the center.

It is most convenient to do this on any covering, such as polyethylene, to which our snowflake will not stick. You can, for example, print out the diagram and place it under a transparent file so that the future snowflake turns out to be as symmetrical as possible.

7:9

We are left with the most fascinating and creative work- Decorating the Christmas tree with snowflakes! Use your imagination a little and your snowflakes will be different from each other, just like their real friends!

10:9

13:9

Beautiful snowflakes are an integral attribute of winter. Like pictures, they attract the eye, striking with the beauty and unusualness of the patterns: large and small, they are so unique that it is simply impossible to find two identical ones. Needlewomen have come up with many ways to convey the delicacy, lightness and originality of snowflakes. One of these techniques was quilling.

What is hidden behind the word “quilling”? Quilling, or paper rolling, is a technique for making compositions from twisted strips of paper.

The name of this type of needlework comes from the English word “quill”, which means “bird feather”.

To understand what the pen has to do with it, you need to plunge into history. Quilling originated in Europe around the 14th and 15th centuries, and was first practiced by monks, who, according to some sources, trimmed the gilded edges of books, wound strips on bird feathers and used them to decorate utensils, imitating gilding. This was especially true for churches with small parishes that had little financial resources. Then this art was forgotten for a long time.

The revival of quilling began at the end of the last century, in Western Europe, in particular in Great Britain and Germany. It also migrated to the East, where local craftsmen changed some of the paper rolling methods and added their own elements, giving it a special flavor. Korean craftsmen were especially successful in this and created their own quilling school.

Among the fundamental differences between European and Korean schools, the following points can be mentioned:

1. Europeans use quilling in the design of photo frames, make postcards and panels, with characteristic minimalism and simple elements.
2. The Korean school approaches this art completely differently, following the principle “The East is a delicate matter”: using the quilling technique they create three-dimensional paintings, each element which is made of many small parts.

In Europe, masters are cheating paper strips onto the rod, while Koreans prefer to twist the workpieces by hand.

Materials and tools for snowflakes using quilling technique

All technologies include right choice materials and tools. Quilling is no exception.

If you have an idea to make unusual decorations in the form of snowflakes, you need to stock up on the following devices:

• Paper (density from 116 to 160 g per m2);
• Scissors;
• PVA glue or other thick glue;
• Rod for twisting paper strips;
• Tweezers with sharp tips;
• Ruler with round holes of different diameters.

Because key point Quilling is the process of twisting strips of paper; special attention should be paid to a tool that will simplify this process, making it the most effective.

Typically it is used:

• A plastic or metal rod sold in specialized stores, at the end of which there is a small slot;
• Ballpoint pen refill;
• Thin awl;
• Toothpick;
• Bamboo stick;
• A needle with a large eye, the tip of which is bitten off.

Craft stores sell a ready-made quilling kit with cut strips of paper of various widths and lengths.

What you need to make a snowflake: quilling patterns

When the tools have been selected, it’s time to start making snowflakes. Quilling is based on combining several basic elements or modules into a single pattern, which ultimately forms a design. Before you start making the modules themselves, you need to prepare blanks - paper strips. If you don’t have a ready-made quilling kit, it’s okay: you can make the material for twisting yourself, following the description.

The instructions are:

• Draw a sheet of paper so that you get stripes with a width of 5 to 15 mm;
• Cut the paper into strips using scissors or a cutter;
• Attach the edge of the strip to the winding device and wind it evenly;
• Remove the wound strip and release the edge so that the resulting roll “opens” to the desired diameter;
• Secure the tip of the strip with glue.

The width of the stripes depends on the type of craft and the experience of the craftsman. The optimal size is 5-7 mm. When using a cutter, you need to place a board under the sheet, be careful and, if possible, do not give children a sharp object in their hands. If you need to make spirals of the same size, you can put the resulting roll in the hole of the ruler and wait.

Original quilling snowflakes: patterns for beginners and master class

When simple parts are mastered, you can begin to create more complex modules.

IN various master classes The following complex elements are mainly found:

1. Open coil. More often this is a large part, the free edge of which is not glued.
2. Curl with a wide hole inside.
3. Tight roll. Once twisted, the spiral does not unravel.
4. Drop. Pinch one edge of the spiral to form a corner.
5. Petal. It is obtained by transforming the “Drop” shape by compressing one of its sides so that a slight bulge is obtained.
6. Eye or leaf. It is obtained by compressing the spiral from both sides.
7. Square. The “Eye” template is compressed on both sides.
8. Rhombus. It is obtained by stretching the sides of the workpiece in the form of a square.
9. Triangle. It turns out if you make the base of the “drop” flat.
10. Arrow. The base of the “triangle” in the middle bends inward.
11. Crescent. It is performed similarly to the “eye” with a slight displacement of the corners and pressing one of the sides inward.
12. Heart. You will need a strip longer than this, which you need to first fold in half and make rolls on each end in turn.
13. Horns. It is performed similarly to the “Heart” module, with the curls going in a direction away from each other.
14. S-shaped curl. The strip is divided into three parts, the edges are twisted so that the middle part is between them.
15. A beam with curls at both ends. The strip is divided into three parts, the edges are curled inward.

These schemes are basic, so this list can be continued endlessly. The variety of forms depends on the imagination of the master.

Volumetric snowflakes using quilling technique: step-by-step diagrams

After mastering the methods for making the module, you can proceed to the final stage - assembling the snowflake. In nature, every snowflake is unique. Quilling gives no less room for imagination.

An openwork, easy-to-make paper snowflake can be created if you step by step:

• Make 6 parts in the form of a drop and glue them together so that you get something resembling a flower;
• Make 6 “eyes” and glue them between the “drops”;
• Make 6 more “droplets” and attach them to the gaps between the “leaves” with the sharp end down;
• Glue 6 tight rolls to the top of the “drops”.

You can add a few more rows of “drops” or “eyes”, replace the described elements with other modules. The number of options is limited only by flights of fancy.

Important: strips can be used to complete modules different lengths to get parts of different sizes.

If you don't want to bother with in different forms modules, the wave can be limited to one type. For example, from tight coils you can make light snowflakes, which, although they will not look as “lacey,” will still delight the eye with their unusualness.

Do-it-yourself realistic quilling snowflakes for the New Year: an original craft

Quilling snowflakes – great option for the creativity of children who can easily cope with twisting rolls and giving them all kinds of shapes. In addition, children's imagination gives the process a new twist and leads to unexpected creative solutions. Quilling snowflakes can become the basis for many crafts that will decorate the interior on the eve of New Year's holidays and will make excellent gifts for family and friends.

They can be used:

• During production greeting card by placing the snowflake on a colored cardboard base;
• How Christmas tree toy;
• When making panels and compositions on New Year's themes;
• Like a decoration hanging from the ceiling or chandelier.

A snowflake is turned into a Christmas tree toy using a satin or guipure ribbon, by which it can be hung.

The snowflake can be either one-color or two-color. They can also be decorated with rhinestones, sparkles, glitters and other materials, or made in some style using certain color combinations.

Quilling snowflakes (video)

New Year's quilling snowflakes are a real find for craft lovers who want to transform their home on the eve of the New Year or Christmas. Easy to make and not requiring expensive materials and tools, this lace beauty will help create a fabulous atmosphere.

The quilling technique appeared quite a long time ago, about 500 years ago. For the first time it began to appear in European countries. This technique involves twisting strips of paper and then gluing them together. These twisted stripes are then used to create various patterns and crafts. Collapsed stripes form both closed and open figures. Simple figures are used to form patterns that can be either simple or entire works of art. The patterns in this technique are very airy and lacy. Therefore, today we will look at how to make a step-by-step original quilling snowflake. We will make an openwork snowflake that can be hung on Christmas tree or near the desktop so that it reminds us that the holidays have arrived and we need to devote more time to family and relaxation.

Learning the basics of quilling technique: snowflake step by step for beginners

• Toothpick;
• Tweezers;
• Scissors;
• Glue;
• Paper.

Let's start making a large snowflake using the quilling technique.

We take a landscape sheet and draw stripes on it using a pencil and ruler. Be sure to make sure that the lines are straight. Then we cut the sheet along the drawn lines. A stationery knife can help us with this.

We take a toothpick and apply it to the edge of the strip, and then we wind the strip onto the toothpick, turn by turn.

We secure the end of the strip and carefully remove the resulting roll from the toothpick.

If you don’t quite understand the description of this process, don’t worry, below you will see a photo that shows step by step the process of creating basic elements.

We make another such blank, only now we squeeze one edge with our fingers. As a result of this action, we get an element that looks like a droplet. For our composition, we repeat the above manipulations five more times.

Then we glue the resulting 6 drops to the first figure.

We take the toothpick again and wind up more rolls and now squeeze them on both sides so that the result is a figurine in the shape of an eye.

Between the petal rays we glue the parts we just made.

Now we take 3 strips, bend them in half and cut them, we get 6 short strips.

We crowd them in the manner described above.

On each tip of the part we glue a figure in the shape of an eye.

We make 6 more coils and bend them with our fingers until we get a square shape.

Glue them at the top to the large coil.

Now we wrap a strip of paper around a pencil, glue the end of the paper and remove it from the pencil. This part will serve as a loop for hanging it on Christmas trees, or whatever your heart desires.

Glue it to one of the tops of our snowflake. We stretch a ribbon or thread through the resulting ring.

As in any type of activity in quilling, of course, there are certain clichés or, in other words, basic elements. Let's look at what they look like. There are various shapes coils Let's look at the most popular ones.

1. An open coil is when the end of the strip is not attached to the main part of the strip.
2. Closed coil - the end of the strip is secured to form a closed loop.
3. Tight coil - the strip is stretched very tightly throughout the entire twisting and is tightly fixed; such a coil looks like a knot on an openwork background.
4. Large coil - when creating, we use a regular pencil or any other thick core or frame for winding.
5. Drop - press one end with your fingers.
6. Eye - press both ends.
7. Petal - squeeze with your fingers and bend on one side.
8. Sheet - squeeze on both sides and make waves.
9. Curls - fold the strip in half and twist the ends in different directions.

You can see various options for snowflake patterns in the photo below:

Quilling is the art of creation openwork patterns from paper. Translated from English, quill means “bird feather.” The brainchild of your creativity can be beautiful airy lace patterns that are completely transparent. You can create amazing compositions, full of all the colors of the rainbow, evoking the mood you need. Paintings made using this technique will fit into any interior: from gothic to high-tech, the flexibility of this art allows you to combine rigor and grace, colorful or dark colors, from flowers to portraits, it depends only on the desires and scale of the work: all this is possible talk about quilling. You can not only have fun, but also benefit both your interior and your wallet, because high-quality work has a high price.

Video selection on the topic of the article

Quilling is a type of handicraft in which different compositions are made from strips of paper rolled into rolls. Snowflakes using this technique turn out incredibly beautiful. It’s easy to learn by repeating the steps step by step. experienced needlewomen. Here it is better to use already invented snowflake quilling patterns. Or you can show your rich imagination and create a unique pattern for the New Year's holiday.

What you need to make snowflakes in quilling style

To create creativity using the quilling technique, you don’t need anything special. The tools that are used for work are in any home, or you can buy them in a store. Namely:

1. Paper. A regular office one, white or colored, will do. Ideally with a density of 116 to 160 g/m2.
2. Scissors. It is advisable to take one with pointed ends.
3. Glue. It is better to use PVA, but paper will also work.
4. A tool for rolling strips of paper. This is an awl or a thin wooden stick (toothpick).
5. Tweezers. It is useful for connecting elements if they are small.
6. Ruler with round holes. Their different diameters make it possible to obtain spirals of different densities.
7. A simple pencil and ruler.

In stores you can find special quilling kits. In them, the paper is already cut into thin strips, it is of various shades, widths and lengths. There is a special tool with a forked end for gripping, as well as a template for forming spirals of different sizes.

Schemes of snowflakes using quilling technique

You need to start making snowflakes using the quilling technique with a drawing. This is an outline of what is to be learned at the end. Any composition consists of basic elements. There are several of them.

Closed modules:

• tight spiral - wind the strip onto the tool, remove it, glue the end to the roll so that it does not unwind;
• free spiral - the edge of the strip is not glued, and the roll unwinds, creating space between the layers;
• oval - the end of the spiral untwisted to the required size is glued and given an oval shape;
• drop - a free spiral is squeezed from one edge with your fingers;
• eye - squeeze two opposite ends;
• triangle – use your fingers to give the roll a triangular shape;
• square - the roll is compressed so that it has a square shape;
• sheet - it will work if you bend the corners of the eye module in different directions.

And also open:

• horns - the strip is folded in half and the ends are twisted outward;
• heart - performed like horns, only the edges are wrapped inward;
• curl - lightly outline the middle, twist the ends in different directions;
• twig - divide the strip in a ratio of 1:2, twist the ends in one direction.

The manufacture of any element begins with winding a tight spiral

Using the constituent parts of quilling, you can make a wide variety of snowflakes by gluing them together in a sequence determined according to the pattern.

Example of a circuit using small quantity basic modules of closed and open type

Here are some ideas for making Christmas decorations.

You can diversify not only the details, but also their color combination

And if you don’t want to tinker for a long time, but want to try this technique, then you can make only 1-2 types of modules and also get unique beauty.

A three-dimensional figure made of droplets and one free spiral in the center

Advice! For beginners, it is better to use diagrams that indicate the sizes of all modules. This will help avoid mistakes.

How to make a snowflake using quilling technique

Having learned to do basic models, and having the desire to decorate your house with voluminous snowflakes, you can fantasize endlessly in your creativity. And create figures of varying degrees of complexity.

Master class quilling snowflakes

You can start with the simplest scheme, which uses basic modules. To do this, you need to make a quilling snowflake step by step, following the master class proposed below. This lesson will use:

• tight roll;
• eye;
• petal;
• horns;
• heart.

Each element must be made in quantities of 6 pieces.

1. Take a sheet of paper. Draw strips 5 mm thick along the length of the side of the sheet. Cut. You will get approximately 40-42 pieces.
   
   
2. Wrap the strip around an awl or toothpick, inserting the tip into the crevice. Remove from the tool and glue the edge so that the part does not unwind. The result is a figure - a tight spiral.
   

   

   A rolled strip of paper is the basis for most quilling elements.

3. Place the paper backing onto the instrument again. Take out the toothpick and place the roll in the round hole in the ruler to let it unwind a little. Glue the edge of the paper to it.
   

   

   Free spiral with space between layers of paper

4. Squeeze the part with your fingers at one end. The resulting element is a petal.
   

   

   The end of the roll squeezed with fingers in the elements of the eyes, drop, etc.

5. Repeat all the steps as for making a petal, but squeeze the roll at both ends with your fingers. The resulting module is an eye.
   
   
6. Take a strip of paper and fold it in half. Twist both ends outward to form horns.
   

   

   This is what one of the main open type elements looks like

7. Do everything as described in the previous paragraph, only wrap the spiral inward rather than outward. The resulting figure is a heart. They also need to be made 6 pieces.
   

   

   A small heart is made from a short strip of paper

8. There were five elements of 6 pieces each. each one that needs to be fastened into one shape.
   

   

   Prepared parts for future quilling snowflakes

9. Assemble the craft. To do this, you first need to fold what you want to get without gluing it together. When you like the result, you can start fixing it.
10. They usually glue them together from the middle, that is, first the petals together, then droplets, horns, hearts and tight spirals.
    

    

    Ready volumetric snowflake will decorate any corner of the house during the New Year holidays

You can make a snowflake by quilling not only white, as shown in the master class, but also in a combination of different shades of blue and blue colors at your own discretion. Dimensions and number of parts can also be selected as desired. And the snowflakes will turn out to be varied, unique, lacy.

Photo of quilling snowflakes

Just as in nature you cannot find two identical snowflakes, you can also get creative by making them using the quilling technique to admire them endlessly. You can diversify the details, color, size, density of modules, etc.

To get such a snowflake, you need to use tweezers to evenly lay the layers of paper

Snowflake resembling a firebird

A simple circuit using a minimum number of parts

Openwork painstaking work

Applying shades gives the work done even more volume

Figures made by an experienced quiller

To create a magical interior for the New Year, decorating your house with unique quilling snowflakes of different sizes and shades, you need to put in a lot of effort. But, in addition to desire and patience, you need to follow the advice of experienced needlewomen. Here are a few of them:

1. You should start learning by making the simplest elements. And only then move on to more complex ones.
2. Identical elements should be made from strips equal in length and width.
3. To get spirals, petals, eyes of the same size, you need to use the same hole while unwinding them.
4. To give snowflakes a festive element, you can decorate them with rhinestones and sparkles.
5. If the strip is double-sided, then the wrong side should be facing the rod.
6. The tool (awl, toothpick) must be rotated clockwise.

Comment! When making quilling snowflakes, a beginner should never rush. Lack of skill will make the work look sloppy. This type of needlework requires patience and imagination.

Conclusion

Simple snowflake quilling patterns are suitable for beginners and children's creativity. And even they can be given a little originality if you choose the color and add holiday elements. Such work can be hung on a Christmas tree, door, under the ceiling, used to decorate a postcard, or included in a New Year’s composition. In any version, it will please the eye and give you a New Year's mood.

What technique can better convey the airiness and lightness, the openwork lace pattern of snowflakes, than the quilling technique? Making snowflakes from paper, or rather from twisted strips, resembles a mosaic or a kaleidoscope with a huge number of options. The prepared parts can be glued to the base, making cards or panels, or they can be glued together to hang amazing lace decorations on the Christmas tree.

To complete these works you will need white office paper. It needs to be cut into strips 5 mm thick along the short side. It is better to cut several sheets at once using a stationery knife along a ruler. For small quantities, you can cut it with scissors.

You can twist the strips using different tools. You can use an awl, a special rod with slots, or a toothpick. But it was for making snowflakes that I most liked working with a wooden skewer.

To make a snowflake (pendant or applique), you need to prepare a variety of shapes from twisted strips. The forms can be closed, that is, glued together, or open, where no glue is used. Both are suitable for applications. And for a snowflake pendant, you can only use closed molds.

• "Eye" shape. Squeeze the round piece from both sides at the same time.
• Shape "Square". Make the “Eye” shape, turn it vertically and squeeze the sides again.
• "Rhombus" shape. Make it out of "Square".
• Triangle shape. Make a “Drop”, grab a corner and flatten the base of the triangle.
• Arrow shape. Make a “Triangle” and use the end of your index finger to press the middle of the short side inward.
• Crescent shape. It is performed almost like the “Eye”, but in a curved shape. And the corners are not pinched opposite each other, but with a shift.